220v-high-voltage-led-strip-light-ac-220v-240v-dual-white-ip65-1100-lumens-per-meter-for-outline--facade-lighting, 220v-high-voltage-led-strip-light-ac-220v-240v-dual-white-ip65-1100-lumens-per-meter-for-outline--facade-lighting, /high-voltage-pvc-rope-without-wire
220v-high-voltage-led-strip-light-ac-220v-240v-dual-white-ip65-1100-lumens-per-meter-for-outline--facade-lighting, 220v-high-voltage-led-strip-light-ac-220v-240v-dual-white-ip65-1100-lumens-per-meter-for-outline--facade-lighting, /high-voltage-pvc-rope-without-wire
Inquiry
220v-high-voltage-led-strip-light-ac-220v-240v-dual-white-ip65-1100-lumens-per-meter-for-outline--facade-lighting, 220v-high-voltage-led-strip-light-ac-220v-240v-dual-white-ip65-1100-lumens-per-meter-for-outline--facade-lighting, /high-voltage-pvc-rope-without-wire
220v-high-voltage-led-strip-light-ac-220v-240v-dual-white-ip65-1100-lumens-per-meter-for-outline--facade-lighting, 220v-high-voltage-led-strip-light-ac-220v-240v-dual-white-ip65-1100-lumens-per-meter-for-outline--facade-lighting, 
Inquiry

220V High Voltage LED Strip Light, AC 220V-240V Dual White IP65, 1100 Lumens per Meter for Outline & Facade Lighting

Most of this range clusters around a few round numbers — 900, 1000, 1200 lumens per metre — and when a specification sits between them it is usually because a lighting design has been worked backwards from a target illuminance and the round numbers did not land. This model delivers 1100 lm/m, and that middle position is the reason to specify it: it fills the gap between the 950 lm/m and 1200 lm/m models without paying for output that is not needed.

Request a Quote
  • Overview
  • Core Features
  • Application Scenarios
  • Technical Specifications
  • Contact

Overview

Description

The rest of the specification is unremarkable in the best sense, which is often what a project wants. Power is 11 W per metre, drawing 0.055 A at mains voltage. Cutting is at 200 mm, the standard interval across the mid-range models, fine enough for bays and panel joints without the waste that comes with very fine pitches on long runs. Colour rendering is Ra 70 with SDCM ≤ 5, so binning is tight even though the rendering index is the range standard — the two figures measure different things, and for colour consistency between reels it is the SDCM that matters.

One point of detail to resolve before the strip is ordered against a shop drawing. The datasheet records the outline dimensions as 13.5 × 6.5 mm, while the model code carries a 14 × 6 mm designation. We publish the datasheet figure, but if the profile is dimensioned into a reveal or a channel detail, confirm against a physical sample rather than relying on either number. Mounting is by clip and screw. Reel length is 50 m. Rated IP65 for sheltered outdoor use, with CE, CB, and RoHS certification held by the manufacturer.

Core Features

Core Features

  • 1100 lumens per metre — fills the gap in the range — sits between the 950 lm/m and 1200 lm/m models, for designs worked backwards from a target illuminance.
  • 11 W and 0.055 A per metre — mid-range power draw, so it suits projects sized between the 9 W and 12 W options.
  • 200 mm cut interval — the standard mid-range pitch; fine enough for bays and panel joints without the waste of very fine pitches on long runs.
  • SDCM ≤ 5 for tight colour binning — the figure that keeps multiple reels reading as one colour on a long elevation.
  • Two white channels in one body — warm and cool wired separately in a single profile, so one installed line replaces two.
  • Operates directly on AC 220–240 V mains — no transformer and no low-voltage distribution to design around.
  • IP65 PVC body for sheltered outdoor use — sealed against dust and water jets; not for submersion or standing water.
  • CE / CB / RoHS certified — manufacturer-held certifications supporting European and international B2B procurement.

Application Scenarios

Application Scenarios

  • Design-led facade schemes with a specified illuminance — the core use case; where 950 lm/m falls short and 1200 lm/m is more than the design needs.
  • Building outline with moderate grazing — enough output to reveal wall texture without washing it out.
  • Commercial elevations with day and evening modes — dual white gives warm and cool from one installed run.
  • Retail and hospitality exteriors — mid-range output for frontages and terraces.
  • Multi-reel runs on long elevations — SDCM ≤ 5 keeps the join between reels invisible.
  • Refurbishment and replacement projects — a mid-range output that matches existing schemes without over-lighting.

Technical Specifications

Technical Specifications

  • Model No. — JNL-W-220V-2835-0120-11-S1XX (the model code carries a 14 × 6 mm designation, while the datasheet records 13.5 × 6.5 mm — we publish the datasheet figure; confirm against a sample if the profile is dimensioned into a detail)
  • Item No. — 106300063
  • LED type — 2835 SMD (18 V, 40–45 lm)
  • LED quantity — 120 PCS/m (dual white)
  • Rated voltage — AC 220 V
  • Input voltage range — AC 200–240 V
  • Rated frequency — 50/60 Hz
  • Input frequency range — 47–63 Hz
  • Rated power — 11 W/m ± 10%
  • Input current — 0.055 A @ 1m
  • Power factor — > 0.9
  • Luminous flux — 1100 lm/m
  • Colour temperature — Dual white; the datasheet field carries the standard 2700–6500 K template entry, so confirm the exact warm/cool pairing with our engineering team at order
  • Colour rendering index — Ra 70
  • SDCM — ≤ 5
  • Beam angle — 120°
  • Lumen maintenance — L80B20 @ 20,000 h
  • Energy efficiency class — F
  • Ingress protection — IP65 (sheltered outdoor use; not for submersion)
  • Outline dimensions — W13.5 × H6.5 ± 0.5 mm (per datasheet)
  • Surface material — PVC
  • Cut length — 200 mm
  • Mounting method — Fixed with buckle and screws
  • Dimming method — Turn on the power and it lights up; warm and cool channels switch independently
  • Switching cycles — 15,000 times
  • Operating temperature — -25°C to +45°C
  • Storage temperature — -40°C to +60°C
  • Relative humidity — 10–90%
  • MTBF — 20,000 h
  • Mains compatibility — AC 200–240 V, 50/60 Hz; not suitable for 120 V residential supply
  • Packing — Reel + Carton
  • Packing quantity — 50 m/reel
  • Certification — CE / CB / RoHS

Contact

Contact

Request quotation, datasheet, or free sample length: tel: +86 18933392222 | email: [email protected] — OEM, bulk order, and distributor pricing available.

220V High Voltage LED Strip Light, AC 220V-240V Dual White IP65, 1100 Lumens per Meter for Outline & Facade Lighting

Most of this range clusters around a few round numbers — 900, 1000, 1200 lumens per metre — and when a specification sits between them it is usually because a lighting design has been worked backwards from a target illuminance and the round numbers did not land. This model delivers 1100 lm/m, and that middle position is the reason to specify it: it fills the gap between the 950 lm/m and 1200 lm/m models without paying for output that is not needed.

Request a Quote

Recommend Products

220v high voltage led strip light ac 220v 240v dual white ip65 1100 lumens per meter for outline  facade lighting-2

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000