This is the highest-output model in the 2025 range, and the specification is deliberately unambiguous about it: 1248 LEDs per metre producing 6000 lumens. To put that in context, it delivers roughly four and a half times the light of the 288 LEDs/M entry model and nearly double the 3300 lm/m of the 624-LED high-density version. It is intended for installations where the strip itself is the primary light source — task benches, display cases, and commercial coves that need to light a room rather than outline it — not for decorative accent where that much output would be wasted or uncomfortable.
Two specifications here are unusual and worth flagging at design stage. The board is 25mm wide, the widest in the range, which must be confirmed against the intended channel or mounting surface. And power draw is 50W per metre at 2.08A — a 5m reel represents roughly 250W, meaning supply sizing, feed point location, and thermal management need to be resolved in the design phase rather than discovered on site. The strip earns energy efficiency class E despite this output, which is better than the F rating of the lower-output 624-LED model, reflecting the efficiency of spreading the load across 1248 chips rather than driving fewer chips harder.
A genuine practical advantage at this density is the cut interval: 4.8mm, by far the finest in the range and roughly a quarter of the 19.2mm pitch on the 624-LED model. That granularity allows near-exact length matching in fitted joinery, display case interiors, and anywhere the run length is dictated by fixed dimensions rather than chosen freely. Installation uses double-sided adhesive tape film. Rated IP20 for indoor dry-location use, with CE, CB, and RoHS certification held by the manufacturer.
Request quotation, datasheet, or free sample length: tel: +86 18933392222 | email: [email protected] — OEM, bulk order, and distributor pricing available.
This is the highest-output model in the 2025 range, and the specification is deliberately unambiguous about it: 1248 LEDs per metre producing 6000 lumens. To put that in context, it delivers roughly four and a half times the light of the 288 LEDs/M entry model and nearly double the 3300 lm/m of the 624-LED high-density version. It is intended for installations where the strip itself is the primary light source — task benches, display cases, and commercial coves that need to light a room rather than outline it — not for decorative accent where that much output would be wasted or uncomfortable.
EN
