Key Features

• True off-grid operation – Solar panel charges an 18650 / 1800 mAh cell by day; the strip auto-illuminates at night with zero mains consumption and no metered running cost.
• Up to 14 hours per charge – A full day of charging delivers up to 14 hours of continuous illumination, covering a complete overnight cycle in most seasons.
• Dual brightness modes – High output at 200 lm / 2 W for active use, low output at 100 lm / 1 W to extend runtime across longer nights.
• Detachable adjustable ground spike – The panel mounts on a removable spike that can be angled toward peak sun, then detached for cleaning, storage, or relocation — a differentiator over fixed-bracket competitors.
• IP65 sealed PVC extrusion – W12.5 × H7.0 ± 0.5 mm brushed-finish PVC body resists rain, dust, and garden irrigation year round.
• Plug-and-play docking connector – The solar control unit and the LED strip join through a single keyed connector; no stripping, soldering, or terminal blocks required.
• Six colour temperature options – Specify 2700 K, 3000 K, 3500 K, 4000 K, 5000 K, or 6500 K at order stage to match your regional market preference.
• Field-cuttable at 50 mm intervals – Installers can trim the strip to suit a specific run length without voiding the sealed construction on the remaining section.

Specifications

Materials & Finish

• Strip housing: PVC extrusion with a brushed external finish, profile W12.5 × H7.0 ± 0.5 mm — flexible enough to follow fence lines and planter edges without stress cracking.
• Ingress protection: IP65 rated across the strip and the docking joint, tested for outdoor exposure to rain, dust, and garden sprinkler contact.
• Battery cell: 18650 lithium cell, 1800 mAh at 3.2 V, housed inside the sealed solar control unit.
• Thermal range: Rated -25 °C to +45 °C operating, -20 °C to +45 °C storage, allowing year-round deployment in temperate and cold-winter markets.
• Photometric stability: L70B20 lumen maintenance at 20,000 hours; SDCM ≤ 7 keeps colour consistent between adjacent reels in a multi-unit installation.
• Mechanical endurance: Button switch rated to 15,000 cycles; MTBF 20,000 hours.

Assembly & Installation

No mains power, no electrician, and no specialist tools are required.

Tools needed: screwdriver, and a drill only if fixing clips to masonry.

Steps:

1. Choose a panel position with unobstructed daylight exposure for most of the day.
2. Push the ground spike into soil, or use the hanging fixture on a wall, fence, or railing.
3. Angle the solar panel toward the strongest available sun.
4. Route the LED strip along the run and secure it with the supplied fixed clips, screws, and expansion bolts.
5. Join the strip to the solar control unit using the keyed docking connector.
6. Press the button to select brightness mode. The kit charges by day and switches on automatically at dusk.

Maintenance: the ground spike detaches for cleaning and off-season storage. Wipe the panel surface periodically — accumulated dust and leaf debris reduce charging efficiency and therefore nightly runtime.

Applications

• Residential gardens and yards – Border, pathway, and planter accent lighting where no outdoor socket exists.
• Balconies, patios, and terraces – Ambient lighting for rental and apartment properties where permanent wiring is not permitted.
• Party and event decoration – Temporary lighting for garden gatherings, seasonal displays, and hospitality settings.
• Camping and outdoor recreation – The detachable ground spike suits pitch-side lighting for campsites, caravans, and glamping operators.
• Landscaping and light commercial – Cafés, garden centres, and small hospitality venues extending usable outdoor hours without electrical works.

Customization

Certifications

• CE
• CB
• RoHS
• Test reports available on request

Packing & Logistics

• Packing type: colour box + carton
• Packing quantity: 20 SET per carton
• Inner box dimensions: L215 × W185 × H100 mm
• Carton dimensions: L525 × W450 × H390 mm
• Accessories included: fixed clip, screw, expansion bolt
• MOQ: 50 sets
• Lead time: 15–21 days
• Port of loading: Guangzhou / Shenzhen

Service

• Warranty: 2 years
• Samples: free samples on standard items; freight collect
• Response time: within 2 hours
• After-sales: technical support by email or phone throughout the warranty period. Report quality issues with photographs, video, and the item number; verified defects are resolved by replacement parts or replacement units shipped with your next order, or by credit where no follow-up order is scheduled. Faults caused by physical damage, unauthorised modification, or use outside the rated environmental conditions fall outside warranty cover.
• Contact: tel: +86 18933392222 | email: [email protected] | global.joineonlux.com

FAQ

Q: Does this solar LED strip light kit need mains power?
A: No. The solar panel charges an integrated 18650 / 1800 mAh battery during the day and the strip switches on automatically at night. There is no mains connection and no running cost, which makes it suitable for gardens, balconies, and campsites with no outdoor socket.

Q: How long does the solar LED strip light run on a single charge?
A: Up to 14 hours after a full day of charging. Selecting the low brightness mode at 100 lm / 1 W extends runtime; the high mode delivers 200 lm at 2 W.

Q: Can the colour temperature be changed after purchase?
A: No. Colour temperature is a build option specified at order stage — 2700 K, 3000 K, 3500 K, 4000 K, 5000 K, or 6500 K. The unit is not field-tunable, so confirm the colour temperature for each order line.

Q: Is this kit supplied with a remote control?
A: No. This 5-metre single colour model uses button control only. If remote operation is required, the 10-metre single colour kit and the dual white, RGB, RGBW, and addressable models in the T series support remote or button control.

Q: Can the LED strip be cut to length?
A: Yes, at 50 mm intervals along the marked cut points. The remaining connected section retains its IP65 sealing; cutting reduces the number of powered LEDs and therefore total light output.

Q: What is the minimum order quantity and lead time?
A: MOQ is 50 sets, with a lead time of 15–21 days. Cartons hold 20 sets each and ship from Guangzhou or Shenzhen.