Key Features

• CRI 95 — highest colour rendering in the D series – Both the 2700K and 6500K channels are rated Ra 95, the top colour accuracy specification in the range.
• Full spectrum dual white construction – Two independently controlled channels at genuine high-fidelity colour rendering, not a single-channel specification.
• 576 LEDs per metre – 288 per channel, maintaining density and colour consistency across both settings.
• 24V operation – Lower current draw than a 12V equivalent for the same output.
• Specification-grade colour accuracy – Suited to applications where CRI 90 is not sufficient and Ra95 is a stated requirement.
• 10mm profile – Sized for the full spectrum construction at this colour rendering specification.
• 28mm cut interval – Precise adjustment granularity for display and retail fixture applications.
• L80B20 at 20,000 hours – 80% lumen retention with matching MTBF, 15,000 rated switching cycles.

Specifications

Materials & Finish

• Construction: full spectrum COB flexible strip with two independently controlled colour channels — 288 LEDs at 2700K and 288 at 6500K per metre, engineered for CRI 95 rendering.
• Profile: W10 × H2.5 ± 0.5 mm, sized for the full spectrum dual-channel construction at this colour rendering specification.
• Surface treatment: dammed stretch coating with phosphor-based colour temperature tuning, formulated for Ra95 output.
• Colour performance: Ra 95 on both channels, SDCM ≤5 — the tightest colour specification combination in the D series.
• Thermal range: -25 °C to +45 °C operating; -40 °C to +60 °C storage.
• Photometric stability: L80B20 at 20,000 hours.
• Mechanical: flexible, bend and twist tolerant; 15,000 switching cycles.

Assembly & Installation

Tools needed: scissors or side cutters, clean dry cloth.

Steps:

1. Confirm the 24V supply capacity against 10W per metre for the total run.
2. Clean and dry the mounting surface.
3. Cut only at the marked 28mm intervals.
4. Peel the backing film and press the strip along its length.
5. Connect using the 3-wire accessory system matched to the dual white channel configuration.
6. Apply power and verify both the 2700K and 6500K channels operate correctly, checking colour accuracy against reference material if the application requires it.

Specification note: where CRI 95 is a stated project requirement — art conservation, photography lighting, premium jewellery or cosmetics display — verify this specific model against the project brief before substituting the CRI 90 full spectrum alternative. The two are not interchangeable where Ra95 is explicitly specified.

Applications

• Fine art and museum display lighting – CRI 95 renders artwork colour with minimal distortion under either warm or daylight setting.
• Photography and film production lighting – Colour-accurate illumination for colour-critical capture work.
• Premium jewellery and cosmetics display – Highest colour fidelity for products where colour perception drives purchase decisions.
• High-end retail and boutique fixtures – Specification-grade lighting for flagship and premium retail environments.
• Colour-critical laboratory and inspection lighting – Accurate colour rendering for quality control and material assessment tasks.
• Luxury hospitality display features – Wine, spirits, and premium product display requiring the highest available colour accuracy.

Customization

Certifications

• CE
• CB
• RoHS
• Test reports available on request

Packing & Logistics

• Packing type: reel + ESD bag + carton
• Packing quantity: 10 m per roll, 50 rolls per carton, 500 m total
• MOQ: 50 sets
• Lead time: 15–21 days
• Port of loading: Guangzhou / Shenzhen

Service

• Warranty: 2 years
• Samples: free samples on standard items; freight collect
• Response time: within 2 hours
• After-sales: technical support by email or phone throughout the warranty period. Report quality issues with photographs, video, and the item number; verified defects are resolved by replacement parts or replacement units shipped with your next order, or by credit where no follow-up order is scheduled. Faults caused by physical damage, unauthorised modification, or use outside the rated environmental conditions fall outside warranty cover.
• Contact: tel: +86 18933392222 | email: [email protected]

FAQ

Q: Is this genuinely CRI 95, and is that different from the CRI 90 dual white models?
A: Yes, this is the highest colour rendering specification in the D series at Ra 95 on both channels, above the Ra90 rating on the other dual white full spectrum model. Specify this model when a project brief explicitly requires CRI 95 or higher.

Q: Why is the output lower than the CRI 90 full spectrum model?
A: 650-750 lm/m against 800-1100 lm/m on the Ra90 model. Pushing colour rendering from Ra90 to Ra95 typically reduces luminous efficacy — this is a standard trade-off in LED phosphor formulation, not a product defect.

Q: What applications actually require CRI 95?
A: Fine art and museum display, photography and film lighting, premium jewellery and cosmetics retail, and colour-critical inspection work are the typical applications where Ra95 is specified over Ra90 or Ra80.

Q: Does the 10mm width limit installation options compared with 8mm strips?
A: The wider profile is necessary for the full spectrum construction at this colour rendering level. Confirm channel width compatibility before specifying, particularly for narrower aluminium profile installations.

Q: What accessories are needed for installation?
A: The 3-wire OA3P and OB3P accessory range, shared with the other full spectrum dual white models in the D series — not compatible with the standard 2P single-colour accessories.

Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 10m reels, 50 reels per carton totalling 500m, shipped from Guangzhou or Shenzhen.