A fixed 20-25mm cut interval works for most cabinet and cove installations, but not all of them — short display niches, precisely measured architectural sections, and custom fixture work sometimes need a length that falls between standard cut points. This model solves that with a 6mm cut interval, effectively cuttable at every LED — the finest length adjustment available in the G series dual white range.
At 168 2835 LEDs per metre and 24V DC, output reaches 720 lm/m, the highest luminous flux figure among the 10x10mm dual white models in the range. The trade for that fine cut precision and higher output is a higher unit cost per metre of finished strip, since manufacturing at this density and cut tolerance requires more precise LED placement than a standard-interval board.
Construction follows the same silicone neon standard as the rest of the G series: gas-phase silicone jacket for a soft touch and continuous, dot-free emitting face, IP68 rating for outdoor and submersion-rated use, and a -25°C to +45°C operating range. Colour temperature is specified at order from 3000K, 4000K, or 6500K.
| Parameter | Details |
|---|---|
| Model No. | JNL-G-024V-2835-0168-08-S1XX-005-YYYY-12-68 |
| Item No. | 103300011 |
| Rated power | 12 W/m ± 10% |
| Rated voltage | 24 V DC |
| Input current | 0.5 A |
| LED type | 2835 |
| LED quantity | 168 PCS/m |
| Luminous flux | 720 lm/m |
| Colour temperature | 3000 / 4000 / 6500 K (specified at order) |
| Colour rendering index | Ra 80 |
| SDCM | < 5 |
| Beam angle | 120° |
| Lumen maintenance | L80B20 @ 50,000 h |
| Energy efficiency class | G |
| Ingress protection | IP68 |
| Outline dimensions | W10 × H10 ± 0.5 mm |
| Surface material | Silicone |
| Cut length | 6 mm (cuttable at every LED) |
| Mounting | Fixed Clamp |
| Dimming method | Turn on the power and it lights up |
| Switching cycles | 15,000 times |
| Operating temperature | -25 °C to +45 °C |
| Relative humidity | 10–90% |
| Storage temperature | -40 °C to +60 °C |
| MTBF | 50,000 h |
| Packing | Scroll + carton |
| Packing quantity | 5 m/roll × 10 rolls = 50 m per carton |
Tools needed: scissors or side cutters, clean dry cloth, measuring tape, fixed clamp accessories.
Steps:
Where the fine cut interval matters: for standard cabinet runs measured in whole metres, a 20-25mm cut interval is usually sufficient. Specify this model specifically when the installation length does not divide evenly into a standard interval, or when several short, precisely matched sections are needed across a project.
| Option | Details |
|---|---|
| Colour temperature | 3000 / 4000 / 6500 K, specified at order |
| CRI | Customisable on request |
| Luminous flux | Customisable on request |
| Length | 5 m per roll standard; cuttable every 6 mm |
| Packaging | Scroll + carton standard; neutral or branded packaging available |
| OEM / ODM | Private label and custom packaging supported |
| MOQ | 50 sets |
| Accessory | Description |
|---|---|
| Fixed Clamp | Supplied 5 pcs per roll for mounting |
| Metal terminal connection wire | For durable, low-resistance feed connections |
| Nylon terminal connection wire | Alternative lightweight connection option |
| End plug | Seals the open end of a cut strip section |
Q: What does "cuttable at every LED" actually mean?
A: The circuit is designed so the strip can be safely cut at 6mm intervals — effectively at every LED position — rather than only at wider marked points every 20-25mm as on standard strips. This allows length matching far more precisely than a standard-interval board.
Q: Why is this model brighter than the other 10x10mm dual white strips?
A: At 720 lm/m, this is the highest output in the 10x10mm dual white family, a result of the LED density and drive current needed to support the fine cut circuit design.
Q: Is this strip more expensive than the standard-interval models?
A: The fine cut precision and higher output typically come at a higher unit cost than the 120 or 288-LED standard-interval models. Specify this model when the cut precision or output is genuinely needed for the application.
Q: Can the colour temperature be changed after purchase?
A: No, colour temperature — 3000K, 4000K, or 6500K — is fixed at the time of order and cannot be changed afterward.
Q: Is IP68 required for this application?
A: IP68 is standard across the G series 10x10mm range, supporting both indoor and outdoor use without needing a separate indoor-only variant.
Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 5m reels, 10 reels per carton totalling 50m, shipped from Guangzhou or Shenzhen.
A fixed 20-25mm cut interval works for most cabinet and cove installations, but not all of them — short display niches, precisely measured architectural sections, and custom fixture work sometimes need a length that falls between standard cut points. This model solves that with a 6mm cut interval, effectively cuttable at every LED — the finest length adjustment available in the G series dual white range.
EN
