Key Features

• Seamless no-dark-zone connector – A dedicated in-line joiner engineered to eliminate the visible gap at connection points that standard connectors leave.
• Continuous light line across joints – Where standard connectors interrupt the emitting surface, this connector maintains an unbroken appearance across multiple strip sections.
• 1400 lm/m at energy class E – Efficient output matching the best figures in the equivalent 8mm family.
• 320 LEDs per metre – Balanced density suited to both direct-view and indirect cove applications.
• 10mm profile – Wider than the standard 8mm strips, accommodating the connector geometry that enables the seamless joint.
• 24V operation – Lower current draw than a 12V equivalent, supporting longer multi-section runs where the seamless connector's benefit compounds.
• Full 2P-10 accessory range – Board connectors, DC Dupont leads, lead wires, and L/T/cross transitions alongside the seamless in-line joiner.
• L80B20 at 20,000 hours – 80% lumen retention with matching MTBF, 15,000 rated switching cycles.

Specifications

Materials & Finish

• Construction: flexible COB board with 320 large-die emitters per metre under a stretch coating providing phosphor colour tuning.
• Profile: W10 × H1.65 ± 0.5 mm — wider than the 8mm family to accommodate the seamless connector geometry.
• Surface treatment: stretch coating with phosphor-based colour temperature tuning.
• Colour consistency: SDCM ≤5 across six colour temperature options.
• Thermal range: -25 °C to +45 °C operating; -40 °C to +60 °C storage.
• Photometric stability: L80B20 at 20,000 hours.
• Mechanical: flexible, bend and twist tolerant; 15,000 switching cycles.

Assembly & Installation

Tools needed: scissors or side cutters, clean dry cloth.

Steps:

1. Plan the full route, including where strip sections will join — the seamless connector's benefit is greatest when joints fall in visible sections of the run.
2. Confirm the 24V supply capacity against 12W per metre for the total length.
3. Clean and dry the mounting surface.
4. Cut only at the marked 50mm intervals.
5. Peel the backing film and press each section along its length.
6. Join sections using the seamless no-dark-zone in-line connector (code OB2P-10) rather than a standard board connector where the joint will be visible.

Where the seamless connector matters most: on a continuous cove line or an exposed cabinet run, a standard connector leaves a small dark interval that is very noticeable once the strip is illuminated. Use the OB2P-10 seamless connector at every joint that falls within direct sightline; for joints hidden behind trim or inside a closed channel, a standard connector is an acceptable lower-cost alternative.

Applications

• Continuous ceiling coves – Seamless joints maintain an unbroken light line across multi-reel installations.
• Long cabinet runs spanning multiple units – Connects across cabinet boundaries without a visible gap at the joint.
• Exposed architectural lighting lines – Where the strip and its joints are in direct view, not concealed behind trim.
• Retail shelving spanning multiple bays – Continuous appearance across shelf sections that exceed a single reel length.
• Wine cabinets and display cabinet banks – Seamless appearance across adjoining cabinet units.
• Wardrobe and closet systems with multiple sections – Unbroken light line across modular storage runs.

Customization

Certifications

• CE
• CB
• RoHS
• Test reports available on request

Packing & Logistics

• Packing type: reel + ESD bag + carton
• Packing quantity: 5 m per roll, 100 rolls per carton, 500 m total
• MOQ: 50 sets
• Lead time: 15–21 days
• Port of loading: Guangzhou / Shenzhen

Service

• Warranty: 2 years
• Samples: free samples on standard items; freight collect
• Response time: within 2 hours
• After-sales: technical support by email or phone throughout the warranty period. Report quality issues with photographs, video, and the item number; verified defects are resolved by replacement parts or replacement units shipped with your next order, or by credit where no follow-up order is scheduled. Faults caused by physical damage, unauthorised modification, or use outside the rated environmental conditions fall outside warranty cover.
• Contact: tel: +86 18933392222 | email: [email protected]

FAQ

Q: What does "seamless" mean for this connector, specifically?
A: A standard in-line connector physically separates two strip sections, leaving a short unlit gap at the joint. The OB2P-10 seamless connector is designed to close that gap so the light line appears continuous across the join, rather than showing a visible dark interval.

Q: Is the seamless connector worth it for hidden installations?
A: Not necessarily. If a joint sits inside a closed channel or behind trim where it is never seen, a standard OA2P-10 connector is a lower-cost option that performs the same electrical function. Reserve the seamless connector for joints that fall in direct view.

Q: Why is this strip 10mm wide instead of 8mm?
A: The wider profile accommodates the physical connector geometry required for the seamless, gap-free joint. The equivalent 8mm boards in the series use a different connector design that does not offer the same no-dark-zone joining capability.

Q: How does the output compare with the 8mm 320-LED board at 24V?
A: Both deliver 1400 lm/m at energy efficiency class E from the same 320-LED density and 24V operation. The specifications are equivalent; the difference is the connector system and the resulting 10mm width.

Q: Can seamless and standard connectors be mixed on the same run?
A: Yes. Use the seamless connector at visible joints and standard connectors at concealed joints within the same installation — both are compatible with the same 10mm strip.

Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 5m reels, 100 reels per carton totalling 500m, shipped from Guangzhou or Shenzhen.