Core Features

• Energy efficiency class C — best rating in the L series — one of only two models in the range to achieve it, against the E and F ratings held by most of the series.
• 1600 lumens per metre from 10W — roughly 160 lm/W against the 130 lm/W of the standard 120-LED model, reducing operating cost on long-hours installations.
• Brighter than the standard model at identical power — 1600 lm/m against 1300 lm/m, both drawing 10W per metre.
• 144 LEDs/M for near-continuous output — 24 more chips per metre than the standard model, reducing visible LED structure in backlit and diffused applications.
• 13.8mm cut interval — finer than the 25mm pitch of the standard 120-LED model, allowing closer length matching in fitted joinery.
• Self-adhesive backing — double-sided tape film bonds directly to aluminium channels, panel recesses, and cabinet undersides without mounting clips.
• L80B20 at 20,000 hours — retains 80% of initial output at 20,000 hours with MTBF rated at the same figure.
• CE / CB / RoHS certified — manufacturer-held certifications supporting European and international B2B procurement.

Application Scenarios

• Backlit panels and signage — the core use case; high efficiency compensates for diffusion loss, and the near-continuous chip pitch avoids visible structure through the panel.
• Under-cabinet kitchen task lighting — 1600 lm/m with class C efficiency suits long daily operating hours.
• Retail display and shelving — reduced running cost across multiple fittings; six colour temperature options match to merchandise category.
• Office and commercial joinery — supports energy compliance documentation on projects with specified efficiency targets.
• Hotel corridor and guest room lighting — efficiency matters where fittings run continuously or on long schedules.
• Feature walls and architectural reveals — even output with lower heat output per lumen than class E/F equivalents.

Technical Specifications

• Model No. — JNL-L-012V-2835-0144-08-S1XX
• Item No. — 101300240
• LED type — 2835 SMD
• LED quantity — 144 PCS/m
• Rated voltage — 12 V DC
• Rated power — 10 W/m ± 10%
• Input current — 0.83 A @ 1m
• Luminous flux — 1600 lm/m
• Colour temperature — 2700 / 3000 / 3500 / 4000 / 5000 / 6500 K (specified at order)
• Colour rendering index — Ra 80
• SDCM — ≤ 5
• Beam angle — 120°
• Lumen maintenance — L80B20 @ 20,000 h
• Energy efficiency class — C
• Ingress protection — IP20 (indoor dry location only)
• Outline dimensions — W8 × H1.2 ± 0.5 mm
• Surface material — Bare PCB (no silicone sleeve)
• Cut length — 13.8 mm
• Mounting method — Double-sided adhesive tape film
• Dimming method — Turn on the power and it lights up
• Switching cycles — 15,000 times
• Operating temperature — -25°C to +45°C
• Storage temperature — -40°C to +60°C
• Relative humidity — 10–90%
• MTBF — 20,000 h
• Connector compatibility — 2P board connector, 2P wire connectors (single & double end), 2P board-to-board straight / L-shape / T-shape / +-shape, 2P DC-head variant
• Packing — Reel + ESD bag + Inner box + Carton
• Packing quantity — 5 m/roll × 100 rolls = 500 m per carton
• Certification — CE / CB / RoHS

Contact

Request quotation, datasheet, or free sample length: tel: +86 18933392222 | email: [email protected] — OEM, bulk order, and distributor pricing available.