Core Features

• 5mm width — narrowest board in the L series — 3mm slimmer than the 8mm models, seating in narrow extrusions, shallow cabinet grooves, and retrofit channels milled to tight tolerances.
• Lowest current draw in the range at 0.42A — well suited to long continuous runs and lower-capacity supplies where voltage drop would otherwise limit run length.
• 24V operation — combined with the low current draw, supports extended runs from a single feed point without brightness fall-off at the far end.
• Six colour temperature options at order — 2700K, 3000K, 3500K, 4000K, 5000K, 6500K specified when ordering; the strip is manufactured to a fixed colour temperature and is not field-switchable.
• 900 lumens per metre at 10W — balanced output for edge and accent lighting rather than primary illumination; energy efficiency class F.
• Self-adhesive backing — double-sided tape film bonds directly to aluminium channels, cabinet edges, and narrow rebates without mounting clips.
• L80B20 at 20,000 hours — retains 80% of initial output at 20,000 hours with MTBF rated at the same figure.
• CE / CB / RoHS certified — manufacturer-held certifications supporting European and international B2B procurement.

Application Scenarios

• Narrow aluminium extrusions — the core use case; seats in slim profiles where 8mm and 10mm boards will not fit.
• Cabinet edge and door reveal lighting — 5mm profile disappears into shallow grooves cut into cabinet carcases and door frames.
• Picture frame and mirror lighting — slim enough to mount behind frames and around mirror perimeters without visible board edges.
• Display case and shelf edge runs — low-profile accent lighting along shelf front edges; low 0.42A draw suits multi-shelf installations from one supply.
• Retrofit channels milled to tight tolerances — the specification to reach for when an existing or designer-specified channel rules out standard-width boards.
• Long continuous accent runs — lowest current in the range means less voltage drop across extended lengths.

Technical Specifications

• Model No. — JNL-L-024V-2835-0120-05-S1XX
• Item No. — 101300175
• LED type — 2835 SMD
• LED quantity — 120 PCS/m
• Rated voltage — 24 V DC
• Rated power — 10 W/m ± 10%
• Input current — 0.42 A @ 1m
• Luminous flux — 900 lm/m
• Colour temperature — 2700 / 3000 / 3500 / 4000 / 5000 / 6500 K (specified at order)
• Colour rendering index — Ra 80
• SDCM — ≤ 5
• Beam angle — 120°
• Lumen maintenance — L80B20 @ 20,000 h
• Energy efficiency class — F
• Ingress protection — IP20 (indoor dry location only)
• Outline dimensions — W5 × H1.2 ± 0.5 mm
• Surface material — Bare PCB (no silicone sleeve)
• Cut length — 50 mm
• Mounting method — Double-sided adhesive tape film
• Dimming method — Turn on the power and it lights up
• Switching cycles — 15,000 times
• Operating temperature — -25°C to +45°C
• Storage temperature — -40°C to +60°C
• Relative humidity — 10–90%
• MTBF — 20,000 h
• Connector compatibility — 2P board connector, 2P wire connectors (single & double end), 2P board-to-board straight / L-shape / T-shape / +-shape, 2P DC-head variant
• Packing — Reel + ESD bag + Inner box + Carton
• Packing quantity — 5 m/roll × 100 rolls = 500 m per carton
• Certification — CE / CB / RoHS

Contact

Request quotation, datasheet, or free sample length: tel: +86 18933392222 | email: [email protected] — OEM, bulk order, and distributor pricing available.