This 12x12mm dual white strip carries 288 2025-type LEDs per metre at 24V DC, delivering 500 lm/m from 9W — a low current draw of just 0.38A per metre, well suited to longer runs from a single feed point. Beyond cabinet and cove lighting, this model is specifically positioned for skirting board and wall protector applications, where the 12mm profile provides a practical mounting cross-section at floor and impact-prone height.
Construction follows the standard G series silicone neon build: gas-phase silicone jacket, continuous front-emitting light face with no visible LED points, and IP68 protection for both indoor and outdoor use across a -25°C to +45°C operating range. The strip cuts every 20.8mm and mounts with the standard fixed clamp system.
Colour temperature is specified at order from 3000K, 4000K, or 6500K. Note that this specific model carries a slightly different colour rendering specification than most of the G series range — confirm the current listed CRI value with your supplier at order time, as it is not held to the Ra80 standard applied across the majority of the G series.
| Parameter | Details |
|---|---|
| Model No. | JNL-G-024V-2025-0288-08-S1XX-005-YYYY-09-68 |
| Item No. | 103300013 |
| Rated power | 9.0 W/m ± 10% |
| Rated voltage | 24 V DC |
| Input current | 0.38 A |
| LED type | 2025 |
| LED quantity | 288 PCS/m |
| Luminous flux | 500 lm/m |
| Colour temperature | 3000 / 4000 / 6500 K (specified at order) |
| SDCM | ≤ 5 |
| Beam angle | 120° |
| Lumen maintenance | L80B20 @ 50,000 h |
| Energy efficiency class | G |
| Ingress protection | IP68 |
| Outline dimensions | W12 × H12 ± 0.5 mm |
| Surface material | Silicone |
| Cut length | 20.8 mm |
| Mounting | Fixed Clamp |
| Dimming method | Turn on the power and it lights up |
| Switching cycles | 15,000 times |
| Operating temperature | -25 °C to +45 °C |
| Relative humidity | 10–90% |
| Storage temperature | -40 °C to +60 °C |
| MTBF | 50,000 h |
| Packing | Box + carton |
| Packing quantity | 5 m/roll × 10 rolls = 50 m per carton |
Colour rendering index for this specific model differs from the Ra80 standard applied across most of the G series — please confirm the current CRI specification with our team when requesting a quote.
Tools needed: scissors or side cutters, clean dry cloth, fixed clamp accessories.
Steps:
Skirting installation note: at floor level, confirm the fixed clamp spacing is adequate to prevent sagging along the run, particularly on longer skirting sections where the strip may see incidental foot or cleaning equipment contact.
| Option | Details |
|---|---|
| Colour temperature | 3000 / 4000 / 6500 K, specified at order |
| CRI | Please confirm current specification at order |
| Luminous flux | Customisable on request |
| Length | 5 m per roll standard; cuttable every 20.8 mm |
| Packaging | Box + carton standard; neutral or branded packaging available |
| OEM / ODM | Private label and custom packaging supported |
| MOQ | 50 sets |
| Accessory | Description |
|---|---|
| Fixed Clamp | Supplied 5 pcs per roll for mounting |
| Metal terminal connection wire | For durable, low-resistance feed connections |
| Nylon terminal connection wire | Alternative lightweight connection option |
| End plug | Seals the open end of a cut strip section |
Q: Is the colour rendering the same as other G series models?
A: This specific model's colour rendering specification differs from the Ra80 standard applied across most of the G series range. Please confirm the current CRI figure with our team when requesting a quote for this model.
Q: Why is this model recommended for skirting boards specifically?
A: The 12x12mm profile provides a practical, low-current-draw light source suited to the mounting constraints of floor-level skirting and wall protector installations.
Q: Can this strip handle a long continuous skirting run?
A: Yes, the low 0.38A per metre current draw at 24V supports longer single-feed runs than a comparable 12V product would allow.
Q: Can the colour temperature be changed after installation?
A: No, it is fixed at manufacture from the option specified at order — 3000K, 4000K, or 6500K.
Q: Is this strip rated for outdoor exposure?
A: Yes, IP68 rating supports outdoor and submersion-rated use within the -25°C to +45°C operating range.
Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 5m reels, 10 reels per carton totalling 50m, shipped from Guangzhou or Shenzhen.
This 12x12mm dual white strip carries 288 2025-type LEDs per metre at 24V DC, delivering 500 lm/m from 9W — a low current draw of just 0.38A per metre, well suited to longer runs from a single feed point. Beyond cabinet and cove lighting, this model is specifically positioned for skirting board and wall protector applications, where the 12mm profile provides a practical mounting cross-section at floor and impact-prone height.
EN
