This AC 220V COB LED strip light connects to mains through a plug-in power cord. There is no separate low-voltage driver to specify, house, or replace. For contractors fitting extended linear installations, that removes a physical component from the design and a fault point from the maintenance schedule.
Low-voltage LED strip installations need a driver, somewhere to mount it, and cabling from driver to strip. On long runs — ceiling coves, wardrobe interiors, display cabinet banks — that infrastructure adds cost and creates a serviceable component at every feed point.
The strip carries 240 COB LEDs per metre producing 850 lm/m, measures just 5mm wide, and is finished in sprayed silicone to IP43. It is supplied on 10m reels — double the length of the low-voltage 5mm models — which suits the extended runs this product is designed for. Six colour temperatures are available from 2700K to 6500K, specified at order.
| Parameter | Details |
|---|---|
| Model No. | JNL-D-220V-COB-0240-05-S1XX-010-YYYY-10-43 |
| Item No. | 105270015 |
| Rated power | 10.5 W/m ± 10% |
| Rated voltage | AC 220 V |
| Input voltage range | AC 200–240 V |
| Rated frequency | 50 / 60 Hz (range 47–63 Hz) |
| Input current | 0.054 A |
| Power factor | > 0.9 |
| LED type | COB, large die 7 × 20 mil |
| LED quantity | 240 PCS/m |
| Luminous flux | 850 lm/m (@3000K) |
| Colour temperature | 2700 / 3000 / 3500 / 4000 / 5000 / 6500 K (specified at order) |
| CRI | Ra 70 |
| SDCM | ≤ 5 |
| Beam angle | 120° |
| Lumen maintenance | L80B20 @ 20,000 h |
| Energy efficiency class | G |
| Ingress protection | IP43 |
| Outline dimensions | W5 × H1.65 ± 0.5 mm |
| Surface material | Sprayed silicone |
| Cut length | 100 mm |
| Mounting | Double-sided adhesive tape film |
| Dimming method | Turn on the power and it lights up |
| Switching cycles | 15,000 times |
| Operating temperature | -25 °C to +45 °C |
| Relative humidity | 10–90% |
| Storage temperature | -40 °C to +60 °C |
| MTBF | 20,000 h |
| Packing | Reel + ESD bag + carton |
| Packing quantity | 10 m per roll |
⚠️ This product connects directly to mains voltage. Installation must be carried out by a qualified electrician in accordance with local wiring regulations.
Tools needed: side cutters, clean dry cloth, and electrician's tooling for the cord connection.
Steps:
Note on the 100mm cut interval: mains-voltage circuit design requires longer LED segments than low-voltage strips, which is why cut points sit at 100mm rather than 10–50mm. Plan runs in 100mm increments; installations needing precise short-length matching are better served by a low-voltage model.
| Option | Details |
|---|---|
| Colour temperature | 2700 / 3000 / 3500 / 4000 / 5000 / 6500 K, specified at order |
| CRI | Customisable on request |
| Length | 10 m per roll standard; cuttable every 100 mm |
| Packaging | Reel + ESD bag + carton standard; neutral or branded packaging available |
| OEM / ODM | Private label and custom packaging supported |
| MOQ | 50 sets |
| Accessory | Code |
|---|---|
| Universal mounting clip | KC-8 |
| Concealed mounting clip | YSK-8 |
| 2P European plug cord | — |
| Board connector | OA2P-5 |
| Board connector with DC Dupont head | OA2P-5-DC |
| Single-ended board lead wire | OA2P-5-1 |
| Double-ended lead wire | OA2P-5-2 |
| In-line joiner | OB2P-5 |
| L-shaped board transition | OB2P-5-L |
| L-shaped wire transition | YOA2P-5-L |
| T-shaped board transition | OB2P-5-T |
| Cross board transition | OB2P-5-十 |
Q: Does this 220V COB LED strip light need a separate driver?
A: No. It connects to mains supply through a plug-in power cord. There is no low-voltage driver to specify, mount, or maintain, which removes a component and a potential fault point from long runs.
Q: Who should install it?
A: A qualified electrician, in accordance with local wiring regulations. This product operates at mains voltage and is not suitable for DIY installation.
Q: How does it compare with the 8mm mains-voltage models in the range?
A: This is the narrowest mains-voltage strip in the D series at 5mm wide, fitting slim channels that will not accept the 8mm models. Output is 850 lm/m at 240 LEDs per metre. Where a wider profile is acceptable, the 8mm and 10mm mains models offer alternative output and cut-length combinations.
Q: Why is the cut interval 100mm when low-voltage strips cut at 10–50mm?
A: Mains-voltage circuit design requires longer LED segments in series. Plan run lengths in 100mm increments. Where precise short-length matching is needed — short cabinet sections, for instance — a low-voltage model is the appropriate choice.
Q: What supply voltages and frequencies does it accept?
A: AC 200–240V at 47–63 Hz, covering both 50 Hz and 60 Hz supply regions. For 110–135V supply areas, specify the AC 127V model in the D series.
Q: What does IP43 cover?
A: IP43 provides protection against solid objects above 1mm and against spraying water at an angle up to 60° from vertical. It suits interior installations and sheltered positions. It is not rated for direct rain exposure, immersion, or washdown environments.
This AC 220V COB LED strip light connects to mains through a plug-in power cord. There is no separate low-voltage driver to specify, house, or replace. For contractors fitting extended linear installations, that removes a physical component from the design and a fault point from the maintenance schedule.
EN
