Core Features

• 1950 lumens per metre on a 48V platform — roughly 50% more output than the 1300 lm/m standard 48V model, combining high light output with the long-run capability of 48V architecture.
• 0.31A per metre — roughly one-third the current of a 12V equivalent — three times less voltage drop over an equivalent length, meaning one feed point where a 12V strip would need several.
• 180 LEDs/M for uniform output along long runs — density keeps the light continuous, so the benefit of consistent voltage is not undermined by visible banding.
• 25mm cut interval — finer than the 50mm pitch of the standard 48V model, allowing closer length matching.
• Six colour temperature options at order — 2700K, 3000K, 3500K, 4000K, 5000K, 6500K specified when ordering; the strip is manufactured to a fixed colour temperature and is not field-switchable.
• Energy efficiency class E — maintained despite the higher output, matching the better-performing models in the range.
• Self-adhesive backing — double-sided tape film bonds directly to aluminium channels, coves, and mounting surfaces without clips.
• CE / CB / RoHS certified — manufacturer-held certifications supporting European and international B2B procurement.

Application Scenarios

• Long commercial perimeter runs — the core use case; high output with low current means brightness stays consistent along extended lengths from a single feed.
• Corridor and circulation lighting — hotel floors, office corridors, and hospital circulation where runs are long and feed points are costly.
• Large retail ceiling features — 1950 lm/m output across big floor areas without intermediate power injection.
• Conference and event venues — long runs with consistent brightness end to end and reduced cabling.
• Industrial and warehouse accent — suits environments already running 48V low-current distribution.
• Architectural cove in large-volume spaces — output sufficient for atria and double-height ceilings over long runs.

Technical Specifications

• Model No. — JNL-L-048V-2835-0180-10-S1XX
• Item No. — To be confirmed (please quote the model number when enquiring)
• LED type — 2835 SMD
• LED quantity — 180 PCS/m
• Rated voltage — 48 V DC
• Rated power — 15 W/m ± 10%
• Input current — 0.31 A @ 1m
• Luminous flux — 1950 lm/m
• Colour temperature — 2700 / 3000 / 3500 / 4000 / 5000 / 6500 K (specified at order)
• Colour rendering index — Ra 80
• SDCM — ≤ 5
• Beam angle — 120°
• Lumen maintenance — L80B20 @ 20,000 h
• Energy efficiency class — E
• Ingress protection — IP20 (indoor dry location only)
• Outline dimensions — W10 × H1.2 ± 0.5 mm
• Surface material — Bare PCB (no silicone sleeve)
• Cut length — 25 mm
• Mounting method — Double-sided adhesive tape film
• Dimming method — Turn on the power and it lights up
• Switching cycles — 15,000 times
• Operating temperature — -25°C to +45°C
• Storage temperature — -40°C to +60°C
• Relative humidity — 10–90%
• MTBF — 20,000 h
• Connector compatibility — 2P board connector, 2P wire connectors (single & double end), 2P board-to-board straight / L-shape / T-shape / +-shape, 2P DC-head variant
• Packing — Reel + ESD bag + Inner box + Carton
• Packing quantity — 5 m/roll × 100 rolls = 500 m per carton
• Certification — CE / CB / RoHS

Contact

Request quotation, datasheet, or free sample length: tel: +86 18933392222 | email: [email protected] — OEM, bulk order, and distributor pricing available.