At 336 LEDs per metre, this is the highest LED density in the entire G series silicone neon range — denser than every other model, front-emitting or side-emitting, in any profile size. That density produces the smoothest, most continuous-looking emitting face available in the range, relevant wherever the strip itself is viewed closely rather than only its diffused glow.
Despite the high LED count, output is 600 lm/m from 11W at 24V DC — a moderate figure compared with the lower-density, higher-power 15-22W models elsewhere in the 16x16mm and 20x20mm range. This reflects a deliberate design trade: maximum density and smoothness rather than maximum raw brightness, at a comparatively efficient 0.46A per metre current draw.
Construction is the standard G series gas-phase silicone jacket, front-emitting, IP68 rated, with a -25°C to +45°C operating range. Colour temperature is specified at order from the Tri-CCT 3-in-1 range: 3000K, 4000K, or 6500K. The strip cuts every 17.9mm.
| Parameter | Details |
|---|---|
| Model No. | JNL-G-024V-2025-0336-10-S1XX-005-YYYY-11-68 |
| Item No. | 103650003 |
| Rated power | 11.0 W/m ± 10% |
| Rated voltage | 24 V DC |
| Input current | 0.46 A |
| LED type | 2025 |
| LED quantity | 336 PCS/m |
| Luminous flux | 600 lm/m |
| Colour temperature | Tri-CCT 3000 / 4000 / 6500 K (3-in-1, specified at order) |
| Colour rendering index | Ra 80 |
| SDCM | ≤ 5 |
| Beam angle | 120° |
| Lumen maintenance | L80B20 @ 50,000 h |
| Energy efficiency class | G |
| Ingress protection | IP68 |
| Outline dimensions | W16 × H16 ± 0.5 mm |
| Surface material | Silicone |
| Cut length | 17.9 mm |
| Mounting | Fixed Clamp |
| Dimming method | Turn on the power and it lights up |
| Switching cycles | 15,000 times |
| Operating temperature | -25 °C to +45 °C |
| Relative humidity | 10–90% |
| Storage temperature | -40 °C to +60 °C |
| MTBF | 50,000 h |
| Packing | ESD bag + box + carton |
| Packing quantity | 5 m/roll × 10 rolls = 50 m per carton |
Tools needed: scissors or side cutters, clean dry cloth, fixed clamp accessories.
Steps:
Choosing this model for close-viewed installations: where the strip will be seen directly at close range — an exposed cove edge, a display cabinet viewed from a short distance — this high-density model produces a noticeably smoother result than the lower-density, higher-output alternatives in the same profile.
| Option | Details |
|---|---|
| Colour temperature | Tri-CCT 3000 / 4000 / 6500 K, specified at order |
| CRI | Customisable on request |
| Luminous flux | Customisable on request |
| Length | 5 m per roll standard; cuttable every 17.9 mm |
| Packaging | ESD bag + box + carton standard; neutral or branded packaging available |
| OEM / ODM | Private label and custom packaging supported |
| MOQ | 50 sets |
| Accessory | Description |
|---|---|
| Fixed Clamp | Standard mounting clamp for channel or direct-surface installation |
| Metal terminal connection wire | For durable, low-resistance feed connections |
| Nylon terminal connection wire | Alternative lightweight connection option |
| End plug | Seals the open end of a cut strip section |
Q: Is this the brightest strip in the 16x16mm range?
A: No, at 600 lm/m it is not the highest output — the 240-LED model in the same profile reaches 900 lm/m. This model instead offers the highest LED density in the entire G series, prioritising a smoother emitting face over raw brightness.
Q: When should I choose density over output?
A: Choose this high-density model where the strip is viewed closely — display cabinets, mirror surrounds, museum cases — and a perfectly smooth light line matters more than maximum brightness. Choose the higher-output 240-LED model for facade and distance-viewed applications.
Q: Why is the cut interval finer than other 16x16mm models?
A: The 17.9mm interval reflects the tighter LED pitch at 336 LEDs per metre, compared with the 25mm interval on the lower-density 240-LED model in the same profile.
Q: Can this strip be used outdoors?
A: Yes, IP68 rating supports outdoor and submersion-rated use within the -25°C to +45°C operating range.
Q: Can colour temperature be changed after installation?
A: No, it is fixed at manufacture from the Tri-CCT 3-in-1 range specified at order.
Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 5m reels, 10 reels per carton totalling 50m, shipped from Guangzhou or Shenzhen.
At 336 LEDs per metre, this is the highest LED density in the entire G series silicone neon range — denser than every other model, front-emitting or side-emitting, in any profile size. That density produces the smoothest, most continuous-looking emitting face available in the range, relevant wherever the strip itself is viewed closely rather than only its diffused glow.
EN
