This 24V version of the 12x12mm Tri-CCT bend-capable strip trades the 12V model's higher current draw for lower-current, longer-run performance at a broadly similar output. It carries 180 2835 LEDs per metre, delivering 500 lm/m from 9W at 24V DC — a current draw of just 0.38A per metre, well below the 0.83A of the 12V equivalent LED count elsewhere in the range.
Like its 12V counterpart, this strip is built with 360° free bending (Ruyi bend) construction, allowing the silicone jacket to curve smoothly in any direction without kinking — suited to curved cabinetry, rounded architectural details, and non-linear signage or accent routing. The 12x12mm profile suits mounting channels and applications sized for the larger cross-section, including skirting board and wall protector work.
Construction is the standard G series gas-phase silicone jacket, front-emitting through a continuous diffusion layer, IP68 rated for indoor and outdoor use across a -25°C to +45°C operating range. Colour temperature is specified at order from the Tri-CCT 3-in-1 range: 3000K, 4000K, or 6500K. Cut interval is 33.33mm.
| Parameter | Details |
|---|---|
| Model No. | JNL-G-024V-2835-0180-05-S1XX-005-YYYY-09-68 |
| Item No. | 103400007 |
| Rated power | 9 W/m ± 10% |
| Rated voltage | 24 V DC |
| Input current | 0.38 A |
| LED type | 2835 |
| LED quantity | 180 PCS/m |
| Luminous flux | 500 lm/m |
| Colour temperature | Tri-CCT 3000 / 4000 / 6500 K (3-in-1, specified at order) |
| Colour rendering index | Ra 80 |
| SDCM | ≤ 5 |
| Beam angle | 120° |
| Lumen maintenance | L80B20 @ 50,000 h |
| Energy efficiency class | G |
| Ingress protection | IP68 |
| Outline dimensions | W12 × H12 ± 0.5 mm |
| Surface material | Silicone |
| Cut length | 33.33 mm |
| Mounting | Fixed Clamp |
| Dimming method | Turn on the power and it lights up |
| Switching cycles | 15,000 times |
| Operating temperature | -25 °C to +45 °C |
| Relative humidity | 10–90% |
| Storage temperature | -40 °C to +60 °C |
| MTBF | 50,000 h |
| Packing | Box + carton |
| Packing quantity | 5 m/roll × 10 rolls = 50 m per carton |
Tools needed: scissors or side cutters, clean dry cloth, fixed clamp accessories.
Steps:
Run length advantage: at 0.38A per metre, this 24V strip supports meaningfully longer single-feed runs than a comparable 12V product, relevant on extended cove or facade installations where the 12V equivalent would need power injection at multiple points.
| Option | Details |
|---|---|
| Colour temperature | Tri-CCT 3000 / 4000 / 6500 K, specified at order |
| CRI | Customisable on request |
| Luminous flux | Customisable on request |
| Length | 5 m per roll standard; cuttable every 33.33 mm |
| Packaging | Box + carton standard; neutral or branded packaging available |
| OEM / ODM | Private label and custom packaging supported |
| MOQ | 50 sets |
| Accessory | Description |
|---|---|
| Fixed Clamp | Supplied 5 pcs per roll for mounting |
| Metal terminal connection wire | For durable, low-resistance feed connections |
| Nylon terminal connection wire | Alternative lightweight connection option |
| End plug | Seals the open end of a cut strip section |
Q: How does this compare with the 12V version at the same profile?
A: Both are 12x12mm Tri-CCT bend-capable strips, but this 24V model draws significantly less current (0.38A vs 0.83A per metre for the 168-LED 12V model), supporting longer runs from a single feed point.
Q: What does 360° free bending allow that a standard strip does not?
A: It allows the strip to curve in any direction — not just along one plane — without kinking or cracking the silicone jacket, suited to curved cabinetry and rounded architectural features.
Q: Can the colour temperature be adjusted after installation?
A: No, it is fixed at manufacture from the Tri-CCT 3-in-1 range specified at order — 3000K, 4000K, or 6500K.
Q: Is this strip suitable for long outdoor cove runs?
A: Yes, the low current draw and IP68 rating both support extended outdoor cove and facade installations within the -25°C to +45°C operating range.
Q: What is the difference between this and the every-LED cuttable 12x12mm model?
A: This model cuts every 33.33mm and prioritises bend flexibility; the every-LED cuttable model cuts every 6mm at higher output and cost. Choose based on whether fine length matching or curved routing is the installation priority.
Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 5m reels, 10 reels per carton totalling 50m, shipped from Guangzhou or Shenzhen.
This 24V version of the 12x12mm Tri-CCT bend-capable strip trades the 12V model's higher current draw for lower-current, longer-run performance at a broadly similar output. It carries 180 2835 LEDs per metre, delivering 500 lm/m from 9W at 24V DC — a current draw of just 0.38A per metre, well below the 0.83A of the 12V equivalent LED count elsewhere in the range.
EN
