Architectural lighting runs — ceiling coves, building outlines, tunnel and landscape lighting — are frequently specified at a scale where the cost and complexity of low-voltage drivers becomes a real line item. Every driver needs mounting, ventilation clearance, and a maintenance access point; on a long installation with multiple driver locations, that adds up.
This AC 220V COB LED strip light removes that layer entirely. It connects to mains supply through a plug-in power cord, so there is no low-voltage driver to specify, house, or service. The strip carries 240 COB LEDs per metre at 8mm width, producing 900 lm/m from 11.5W, and accepts a wide 220–240V supply range at 47–63 Hz — covering both 50 Hz and 60 Hz markets from one stock item.
Supplied on 10m reels, it is built for the scale of installation this connection method suits: cove lighting, building outlines, landscape and tunnel illumination, and advertising signage where long continuous runs are the norm rather than the exception. The strip is rated IP43, energy class G, and offers six colour temperatures from 2700K to 6500K specified at order.
| Parameter | Details |
|---|---|
| Model No. | JNL-D-220V-COB-0240-08-S1XX-010-YYYY-11-43 |
| Item No. | 105300025 |
| Rated power | 11.5 W/m ± 10% |
| Rated voltage | AC 220 V |
| Input voltage range | AC 220–240 V |
| Rated frequency | 50 Hz (range 47–63 Hz) |
| Input current | 0.056 A |
| Power factor | ≥ 0.9 |
| LED type | COB, large die 7 × 20 mil |
| LED quantity | 240 PCS/m |
| Luminous flux | 900 lm/m (@6500K) |
| Colour temperature | 2700 / 3000 / 3500 / 4000 / 5000 / 6500 K (specified at order) |
| CRI | Ra 80 |
| SDCM | ≤ 5 |
| Beam angle | 120° |
| Lumen maintenance | L80B20 @ 20,000 h |
| Energy efficiency class | G |
| Ingress protection | IP43 |
| Outline dimensions | W8 × H1.65 ± 0.5 mm |
| Surface material | Sprayed silicone |
| Cut length | 100 mm |
| Mounting | Double-sided adhesive tape film |
| Dimming method | Turn on the power and it lights up |
| Switching cycles | 15,000 times |
| Operating temperature | -25 °C to +45 °C |
| Relative humidity | 10–90% |
| Storage temperature | -40 °C to +60 °C |
| MTBF | 20,000 h |
| Packing | Reel + ESD bag + carton |
| Packing quantity | 10 m/roll × 50 pcs = 500 m per carton |
⚠️ This product connects directly to mains voltage. Installation must be carried out by a qualified electrician in accordance with local wiring regulations.
Steps:
Note on the 100mm cut interval: mains-voltage circuit design requires longer LED segments in series than low-voltage strips. Plan run lengths in 100mm increments; short precision-matched sections are better served by a low-voltage model.
| Option | Details |
|---|---|
| Colour temperature | 2700 / 3000 / 3500 / 4000 / 5000 / 6500 K, specified at order |
| CRI | Customisable on request |
| Power | Customisable on request |
| Length | 10 m per roll standard; cuttable every 100 mm |
| Packaging | Reel + ESD bag + carton standard; neutral or branded packaging available |
| OEM / ODM | Private label and custom packaging supported |
| MOQ | 50 sets |
| Accessory | Code |
|---|---|
| Universal mounting clip | KC-8 |
| Concealed mounting clip | YSK-8 |
| Board connector | OA2P-8 |
| Board connector with DC Dupont head | OA2P-8-DC |
| Single-ended board lead wire | OA2P-8-1 |
| Double-ended lead wire | OA2P-8-2 |
| In-line joiner | OB2P-8 |
| L-shaped board transition | OB2P-8-L |
| L-shaped wire transition | YOA2P-8-L |
| T-shaped board transition | OB2P-8-T |
| Cross board transition | OB2P-8-十 |
Q: Does this strip need a separate low-voltage driver?
A: No. It connects to mains supply through a plug-in power cord, removing the driver, its mounting location, and its cabling from the installation entirely.
Q: Who can install this product?
A: A qualified electrician only, in accordance with local wiring regulations. This is a mains-voltage product and is not suitable for DIY installation.
Q: What supply voltages does it accept?
A: AC 220–240V at 47–63 Hz, covering both 50 Hz and 60 Hz regions. For 110–135V markets, specify the AC 127V model in the D series.
Q: Why does it cut every 100mm instead of every 25-50mm like the low-voltage strips?
A: Mains-voltage circuit design requires longer LED segments in series. Plan runs in 100mm increments; for precise short-length matching, a low-voltage model is the better choice.
Q: What does IP43 allow for outdoor use?
A: IP43 protects against solid objects above 1mm and spraying water up to 60° from vertical. It suits sheltered exterior positions and interior installations, but is not rated for direct rain exposure, immersion, or washdown.
Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 10m reels, 50 reels per carton totalling 500m, shipped from Guangzhou or Shenzhen.
Architectural lighting runs — ceiling coves, building outlines, tunnel and landscape lighting — are frequently specified at a scale where the cost and complexity of low-voltage drivers becomes a real line item. Every driver needs mounting, ventilation clearance, and a maintenance access point; on a long installation with multiple driver locations, that adds up.
EN
