This is the 12x12mm counterpart to the fine-cut 10x10mm dual white model in the G series, offering the same every-LED cut precision — 6mm intervals — in the larger profile size. Output reaches 650 lm/m from 168 2835 LEDs per metre at 24V DC, the highest luminous flux figure among the 12x12mm dual white models in the range.
The combination of fine cut precision and larger profile suits installations that need both a bigger light source — for skirting boards, wall protectors, or larger-channel architectural work — and the flexibility to terminate at a length that does not fall on a standard 25-33mm cut mark. Manufacturing at this density and cut tolerance is more demanding than a standard-interval board, which is reflected in a higher unit cost per finished metre than the entry 120-LED model in the same profile.
Construction matches the rest of the 12x12mm dual white family: gas-phase silicone jacket, continuous front-emitting light face, IP68 protection, and a -25°C to +45°C operating range. Colour temperature is specified at order from 3000K, 4000K, or 6500K.
| Parameter | Details |
|---|---|
| Model No. | JNL-G-024V-2835-0168-08-S1XX-005-YYYY-13-68 |
| Item No. | 103300014 |
| Rated power | 13 W/m ± 10% |
| Rated voltage | 24 V DC |
| Input current | 0.54 A |
| LED type | 2835 |
| LED quantity | 168 PCS/m |
| Luminous flux | 650 lm/m |
| Colour temperature | 3000 / 4000 / 6500 K (specified at order) |
| Colour rendering index | Ra 80 |
| SDCM | ≤ 5 |
| Beam angle | 120° |
| Lumen maintenance | L80B20 @ 50,000 h |
| Energy efficiency class | G |
| Ingress protection | IP68 |
| Outline dimensions | W12 × H12 ± 0.5 mm |
| Surface material | Silicone |
| Cut length | 6 mm (cuttable at every LED) |
| Mounting | Fixed Clamp |
| Dimming method | Turn on the power and it lights up |
| Switching cycles | 15,000 times |
| Operating temperature | -25 °C to +45 °C |
| Relative humidity | 10–90% |
| Storage temperature | -40 °C to +60 °C |
| MTBF | 50,000 h |
| Packing | Box + carton |
| Packing quantity | 5 m/roll × 10 rolls = 50 m per carton |
Tools needed: scissors or side cutters, clean dry cloth, measuring tape, fixed clamp accessories.
Steps:
Profile and cut precision together: this is the only 12x12mm dual white model in the range combining the larger profile with every-LED cut precision. Specify it when both factors matter for the installation; for standard cabinet runs, the entry 120-LED 12x12mm model is more economical.
Q: How does this differ from the 10x10mm every-LED cuttable model?
A: Same 6mm cut precision, but this model uses the larger 12x12mm profile and delivers slightly lower output (650 vs 720 lm/m) at a higher power draw per metre. Choose based on the mounting channel or profile size available at the installation site.
Q: Why is this more expensive than the standard 120-LED 12x12mm model?
A: The every-LED cut design and higher LED density require more precise manufacturing than a standard 25mm-interval board. Specify this model when the fine cut precision is genuinely needed.
Q: Can this strip be used for skirting board applications?
A: Yes, the 12x12mm profile is well suited to skirting and wall protector installations, and the fine cut precision helps match non-standard room or wall section lengths.
Q: Is the colour temperature adjustable after installation?
A: No, it is fixed at manufacture based on the option specified at order — 3000K, 4000K, or 6500K.
Q: Does this strip require a controller?
A: No, it connects directly to a 24V DC supply and illuminates immediately.
Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 5m reels, 10 reels per carton totalling 50m, shipped from Guangzhou or Shenzhen.
This is the 12x12mm counterpart to the fine-cut 10x10mm dual white model in the G series, offering the same every-LED cut precision — 6mm intervals — in the larger profile size. Output reaches 650 lm/m from 168 2835 LEDs per metre at 24V DC, the highest luminous flux figure among the 12x12mm dual white models in the range.
EN
