Key Features

• 600 pcs 5050 RGB LEDs over 10 metres – Full colour change at consistent density along the entire run, matching the LEDs-per-metre of the 5 metre RGB kit.
• Single-controller colour sync – One control unit drives the full 10 metres, so colour transitions stay synchronised end to end — a limitation when two shorter kits are used side by side.
• 26700 / 4000 mAh high-capacity battery – Specified for the 5 W load of a 600-LED colour strip across a full overnight period.
• RF remote at 10–20 metres – Radio control without line of sight, unaffected by dust, grease, or physical obstructions; button control retained on the unit.
• Zero infrastructure cost – No trenching, no cabling, no electrician, no metered consumption.
• Detachable adjustable ground spike – Angle the panel toward the strongest sun; remove it for cleaning or off-season storage.
• IP65 brushed PVC extrusion – W13.0 × H7.0 ± 0.5 mm profile rated from -25 °C to +45 °C for year-round outdoor deployment.
• 120° beam angle – Even colour wash across long surfaces without visible gaps between emitters.

Specifications

Materials & Finish

• Strip housing: brushed-finish PVC extrusion, W13.0 × H7.0 ± 0.5 mm, sized for the 5050 RGB package and flexible enough to follow curved boundaries over a long run.
• LED format: 5050 RGB three-die packages, 600 pcs across 10 metres.
• Ingress protection: IP65 across the strip and the docking joint.
• Battery cell: 26700 lithium cell, 4000 mAh at 3.2 V, matched to the 5 W load.
• Thermal range: -25 °C to +45 °C operating, -20 °C to +45 °C storage, 10–90% relative humidity.
• Photometric stability: L70B20 lumen maintenance at 20,000 hours.
• Mechanical endurance: 15,000 switching cycles; MTBF 20,000 hours.

Assembly & Installation

Tools needed: screwdriver, and a drill if fixing clips to masonry or hard fencing.

Steps:

1. Measure the route before fixing — confirm the full path stays within 10 metres.
2. Position the solar panel where daylight exposure lasts longest through the day.
3. Insert the ground spike into soil, or hang the panel from a wall, fence, or railing.
4. Angle the panel toward peak sun.
5. Fix the strip at 500–600 mm intervals using the supplied clips, screws, and expansion bolts.
6. Join the strip to the solar control unit with the keyed docking connector.
7. Pair the RF remote and verify colour changes reach the far end of the run.

Design note for long colour runs: plan the route so the strip washes a continuous surface — fence panels, a retaining wall, or a decking edge. A 10 metre colour run reads as a single designed feature when it grazes a surface, and as scattered points of light when it does not.

Applications

• Complete garden perimeters – Synchronised colour lighting around a full boundary from one control unit.
• Event lawns and marquees – Long decorative runs for weddings, parties, and outdoor functions.
• Large terraces, decking, and pergolas – Continuous colour wash along extended edges and structural lines.
• Hospitality and retail exteriors – Garden bars, restaurant terraces, and shopfronts changing colour scheme by season or event.
• Driveways and approach paths – Decorative colour guidance along longer entry routes.
• Festive installations – Seasonal displays requiring extended colour coverage with no electrical

Customization

Certifications

• CE
• CB
• RoHS
• Test reports available on request

Packing & Logistics

• Packing type: colour box + carton
• Packing quantity: 20 SET per carton
• Inner box dimensions: L235 × W205 × H105 mm
• Carton dimensions: L550 × W490 × H430 mm
• Accessories included: fixed clip, screw, expansion bolt
• MOQ: 50 sets
• Lead time: 15–21 days
• Port of loading: Guangzhou / Shenzhen

Service

• Warranty: 2 years
• Samples: free samples on standard items; freight collect
• Response time: within 2 hours
• After-sales: technical support by email or phone throughout the warranty period. Report quality issues with photographs, video, and the item number; verified defects are resolved by replacement parts or replacement units shipped with your next order, or by credit where no follow-up order is scheduled. Faults caused by physical damage, unauthorised modification, or use outside the rated environmental conditions fall outside warranty cover.
• Contact: tel: +86 18933392222 | email: [email protected] | global.joineonlux.com

FAQ

Q: Why choose one 10 metre RGB kit instead of two 5 metre kits?
A: A single control unit drives the whole run, so colour changes stay synchronised across all 10 metres. Two independent kits each have their own controller and remote, and keeping them visually in step is unreliable. One kit also means one solar panel to position and one battery to manage.

Q: What battery does the 10 metre RGB kit use?
A: A 26700 / 4000 mAh cell, against the 18650 / 1800 mAh cell in the 5 metre version. The larger capacity supports the 5 W load of 600 LEDs over a full night.

Q: Does the RGB strip include a white light mode?
A: This is an RGB colour-changing product. For a dedicated warm white channel alongside colour change, specify the RGBW models in the T series, which combine 5050 RGB with 2835 white LEDs at 3000 K.

Q: How is the strip controlled at the far end of a 10 metre run?
A: The RF remote operates at 10–20 metres without line of sight, which covers the full length of the run from any position along it. The button on the control unit provides local control.

Q: Is the kit suitable for winter use?
A: The operating range is -25 °C to +45 °C. Runtime in winter depends on available daylight for charging; the shorter charging window reduces nightly operating hours.

Q: What are the MOQ, lead time, and port of loading?
A: MOQ is 50 sets, lead time 15–21 days, shipped from Guangzhou or Shenzhen. Cartons hold 20 sets each.