Key Features

• AC 127V for 110-135V supply regions – Correctly matched to the electrical infrastructure of North American and other 110–135V markets, rather than adapted from a 220V product.
• Plug-in power cord connection – No low-voltage driver to specify, mount, or maintain.
• 360 LEDs per metre – Higher density than the entry 240-LED mains model, at 1000 lm/m output.
• 10m reels – Extended length suited to long architectural runs, reducing joint count.
• Power factor ≥0.9 – Efficient mains loading at 127V.
• 8mm slim profile – Standard channel compatibility for mains-voltage fittings.
• Six colour temperature options – 2700K to 6500K specified at order.
• Dot-free COB emission – Continuous phosphor line suited to indirect cove and outline viewing.

Specifications

Materials & Finish

• Construction: COB flexible strip with continuous phosphor emitting surface, engineered specifically for 127V AC operation.
• Profile: W8 × H1.65 ± 0.5 mm.
• Surface treatment: sprayed silicone, providing IP43 protection.
• LED die: large die 6 × 20 mil.
• Thermal range: -25 °C to +45 °C operating; -40 °C to +60 °C storage.
• Photometric stability: L80B20 at 20,000 hours with matching MTBF.
• Electrical: power factor ≥0.9, frequency tolerance 47–63 Hz.

Assembly & Installation

⚠️ This product connects directly to mains voltage. Installation must be carried out by a qualified electrician in accordance with local wiring regulations.

Steps:

1. Confirm the local supply falls within the 110–135V accepted range before ordering — this strip is not compatible with 220–240V supply.
2. Plan the run and confirm total length against the supply circuit rating at 12W per metre.
3. Clean and dry the mounting surface.
4. Cut only at the marked 100mm intervals.
5. Peel the backing film and press the strip along the run.
6. Fit the plug-in power cord to the strip end, ensuring the end cap and sealing are correctly seated, then verify all connections before energising.

Sourcing note for distributors: confirm which supply voltage band applies to the destination market before specifying between this model and the AC 220V equivalents in the D series. They are not interchangeable, and installing the wrong voltage variant will result in strip failure or non-compliant operation.

Applications

• Architectural lighting in North American and 110-135V markets – Correctly voltage-matched COB strip for regional electrical infrastructure.
• Ceiling coves and building outlines – Long continuous runs without driver placement constraints.
• Landscape and facade lighting – Sheltered exterior architectural detailing.
• Advertising and signage illumination – Backlit signage and light box perimeters.
• Industrial and tunnel lighting – Long-run installations minimising component count.
• Corridor and stairwell lighting – Extended commercial circulation space lighting.

Customization

Certifications

• CE
• CB
• RoHS
• Test reports available on request

Packing & Logistics

• Packing type: reel + ESD bag + carton
• Packing quantity: 10 m per roll, 50 rolls per carton, 500 m total
• MOQ: 50 sets
• Lead time: 15–21 days
• Port of loading: Guangzhou / Shenzhen

Service

• Warranty: 2 years
• Samples: free samples on standard items; freight collect
• Response time: within 2 hours
• After-sales: technical support by email or phone throughout the warranty period. Report quality issues with photographs, video, and the item number; verified defects are resolved by replacement parts or replacement units shipped with your next order, or by credit where no follow-up order is scheduled. Faults caused by physical damage, unauthorised modification, or use outside the rated environmental conditions fall outside warranty cover.
• Contact: tel: +86 18933392222 | email: [email protected]

FAQ

Q: Is this compatible with a standard 220V European supply?
A: No. This model is built for a 110–135V input range and is not compatible with 220–240V mains. For European and other 220–240V markets, specify the AC 220V models in the D series.

Q: What markets is this strip designed for?
A: Regions running a nominal 110–127V supply, including North America and parts of Latin America. Confirm the local voltage standard before ordering.

Q: Does this need a low-voltage driver?
A: No, it connects to mains through a plug-in power cord with no separate low-voltage driver, the same connection approach used across the mains-voltage models in the D series, correctly matched to 127V input.

Q: How does it compare with the AC 220V 288-LED strip?
A: Different supply voltage, higher LED density (360 vs 288), and Ra80 rather than Ra90 colour rendering. Choose based on the destination market's electrical supply first — voltage compatibility is not optional.

Q: Who should install this product?
A: A qualified electrician familiar with 110-135V wiring practices, in accordance with local regulations.

Q: What are the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 10m reels, 50 reels per carton totalling 500m, shipped from Guangzhou or Shenzhen.