Key Features

• Addressable effects plus real warm white – IC-driven dream color sequences for occasions, dedicated 3000 K warm white at 210 lm for everyday evening use.
• Dual LED architecture – 5050 RGB under addressable control combined with 2835 white packages, 600 pcs total across 5 metres.
• Measured white performance – 210 lm at 2 W and 85 lm at 1 W, both at 3000 K, with CRI 70 and SDCM ≤ 7.
• Highest white output among the 5 metre models – 210 lm exceeds both the 5 metre RGBW kit at 160 lm and the single colour kit at 200 lm.
• Two brightness levels – Trade output against runtime on shorter winter charging days.
• RF remote at 10–20 metres – Switch between effect modes and white light without line of sight; button control retained on the unit.
• Fully off-grid – Solar charging into an 18650 / 1800 mAh cell; no mains, no wiring, no running cost.
• IP65 brushed PVC extrusion – W13.0 × H7.0 ± 0.5 mm rated -25 °C to +45 °C, 15,000 switching cycles, MTBF 20,000 hours.

Specifications

Materials & Finish

• Strip housing: brushed-finish PVC extrusion, W13.0 × H7.0 ± 0.5 mm, carrying both LED technologies on a single board.
• LED configuration: 5050 RGB under IC addressable control plus 2835 warm white at 3000 K on an independent channel, 600 pcs total.
• Ingress protection: IP65 across the strip body and the strip-to-controller docking joint.
• Battery cell: 18650 lithium cell, 1800 mAh at 3.2 V, sealed within the solar control unit.
• Thermal range: -25 °C to +45 °C operating, -20 °C to +45 °C storage, 10–90% relative humidity.
• Photometric quality: CRI 70 and SDCM ≤ 7 on the white channel; L70B20 lumen maintenance at 20,000 hours.
• Mechanical endurance: 15,000 switching cycles; MTBF 20,000 hours.

Assembly & Installation

Tools needed: screwdriver, and a drill if fixing clips to masonry.

Steps:

1. Position the solar panel where daylight exposure is longest through the day.
2. Insert the ground spike into soil, or hang the panel on a wall, fence, or railing.
3. Angle the panel toward peak sun.
4. Fix the strip along a continuous route with the supplied clips, screws, and expansion bolts.
5. Connect the strip to the solar control unit through the keyed docking connector.
6. Pair the RF remote, then test both the dynamic effect modes and the 3000 K warm white channel.

Route note: because this model runs addressable sequences, keep the strip on a single readable path so chase and gradient effects travel in one direction. The warm white channel is unaffected by routing, but the effect modes depend on it.

Applications

• Everyday garden lighting with occasional effects – Warm white for ordinary evenings, dream color sequences when entertaining.
• Outdoor dining and terraces – 3000 K warm white through the meal, dynamic colour afterwards.
• Hospitality venues – Garden bars and restaurant terraces running white for service and animated colour for themed nights.
• Balconies and roof terraces – Both practical and decorative lighting from one installation, with no wiring required.
• Seasonal and festive displays – Animated colour for holidays, warm white the rest of the year, from the same product.
• Event and function spaces – Working light during setup, dynamic effects during the event itself.

Customization

Certifications

• CE
• CB
• RoHS
• Test reports available on request

Packing & Logistics

• Packing type: colour box + carton
• Packing quantity: 20 SET per carton
• Inner box dimensions: L215 × W185 × H100 mm
• Inner box weight: 956 g
• Carton dimensions: L525 × W450 × H390 mm
• Accessories included: fixed clip, screw, expansion bolt
• MOQ: 50 sets
• Lead time: 15–21 days
• Port of loading: Guangzhou / Shenzhen

Service

• Warranty: 2 years
• Samples: free samples on standard items; freight collect
• Response time: within 2 hours
• After-sales: technical support by email or phone throughout the warranty period. Report quality issues with photographs, video, and the item number; verified defects are resolved by replacement parts or replacement units shipped with your next order, or by credit where no follow-up order is scheduled. Faults caused by physical damage, unauthorised modification, or use outside the rated environmental conditions fall outside warranty cover.
• Contact: tel: +86 18933392222 | email: [email protected] | global.joineonlux.com

FAQ

Q: How does this differ from the standard addressable dream color kit?
A: This model adds a dedicated 3000 K warm white channel using separate 2835 LEDs, and carries 600 pcs in total against 150 pcs on the colour-only 5 metre model. It provides both dynamic colour effects and usable white garden lighting; the colour-only version is a decorative effects product.

Q: How does it compare with the RGBW kit?
A: Both combine colour with dedicated 3000 K warm white. The difference is the colour capability: this model uses IC-driven addressable control for multi-colour dynamic sequences, while the RGBW model produces one uniform colour across the run at a time. This model also delivers higher white output at 210 lm against 160 lm.

Q: Is the white light mixed from the RGB channels?
A: No. It comes from dedicated 2835 white LEDs at 3000 K, rated CRI 70 and SDCM ≤ 7, delivering 210 lm at 2 W. Mixed white from RGB channels reads cold and uneven by comparison.

Q: Can colour effects and warm white run simultaneously?
A: The channels are selected by remote or button according to the mode required — dynamic colour for decorative use, warm white for general lighting.

Q: Does the remote need line of sight to work?
A: No. The RF remote operates at 10–20 metres through obstructions, unaffected by dust or grease on the control unit.

Q: What are the MOQ, lead time, and port of loading?
A: MOQ is 50 sets, lead time 15–21 days, shipping from Guangzhou or Shenzhen. Cartons hold 20 sets each.