Most silicone neon strips in this range use a flat square cross-section — this model is the exception. Its arc-shaped W6 × H12mm profile is purpose-built for side-emission, directing light out through the curved side face rather than the flat top, and giving channel letters and edge-lit signage a rounded, glare-controlled light line that a square profile cannot reproduce.
At 24V DC it runs 120 pcs/m of 2835 LEDs for 360 lm/m from 11W, with dual white colour temperature — 3000K, 4000K, or 6500K — specified at the point of order rather than switched in the field. Colour consistency is held at SDCM < 5, with Ra80 rendering and a 120° beam angle.
Two further points set this model apart from the rest of the G series square-profile range. First, ingress protection here is IP65, not the IP68 rating used across the square 10/12/16/20mm profiles — appropriate for protected outdoor signage and splash-exposed installations rather than full submersion duty. Second, the cut interval is tighter: 8.33mm, cuttable at every LED (the "Ruyi cut" convention), giving finer length precision for exact letter and sign dimensions than the wider intervals used on several square-profile models.
Construction remains gas-phase silicone over the LED board, with a -25°C to +45°C operating range, 15,000-cycle switching endurance, and an L80B20 lumen maintenance rating at 50,000 hours. It connects directly to a 24V DC supply and illuminates immediately upon connection.
| Parameter | Details |
|---|---|
| Model No. | JNL-G-024V-2835-0120-08-S1XX-005-YYYY-11-68 |
| Item No. | 103300016 |
| Rated power | 11.0 W/m ± 10% |
| Rated voltage | 24 V DC |
| Input current | 0.46 A |
| LED type | 2835 |
| LED quantity | 120 PCS/m |
| Luminous flux | 360 lm/m |
| Colour temperature | 3000 / 4000 / 6500 K (dual white, specified at order) |
| Colour rendering index | Ra 80 |
| SDCM | < 5 |
| Beam angle | 120° |
| Lumen maintenance | L80B20 @ 50,000 h |
| Energy efficiency class | G |
| Ingress protection | IP65 |
| Outline dimensions | W6 × H12 ± 0.5 mm (arc profile) |
| Surface material | Silicone |
| Cut length | 8.33 mm (cuttable at every LED / Ruyi cut) |
| Mounting | Fixed Clamp |
| Dimming method | Turn on the power and it lights up |
| Switching cycles | 15,000 times |
| Operating temperature | -25 °C to +45 °C |
| Relative humidity | 10–90% |
| Storage temperature | -40 °C to +60 °C |
| MTBF | 50,000 h |
| Packing | ESD bag + box + carton |
| Packing quantity | 5 m/roll × 10 rolls = 50 m per carton |
Tools needed: scissors or side cutters, clean dry cloth, fixed clamp accessories.
Steps:
Orientation check before final fixing: because this is a side-emitting strip, confirm the emitting face is correctly oriented toward the viewer before permanently fixing the strip inside a channel letter or sign housing — reversed orientation is the most common installation error with side-emitting product.
Protection level note: IP65 on this model supports protected outdoor and splash-exposed use; for installations requiring full submersion protection, the square-profile IP68 models elsewhere in this range are the appropriate choice.
| Option | Details |
|---|---|
| Colour temperature | 3000 / 4000 / 6500 K, specified at order |
| CRI | Customisable on request |
| Luminous flux | Customisable on request |
| Length | 5 m per roll standard; cuttable every 8.33 mm |
| Packaging | ESD bag + box + carton standard; neutral or branded packaging available |
| OEM / ODM | Private label and custom packaging supported |
| MOQ | 50 sets |
| Accessory | Description |
|---|---|
| Fixed Clamp | Supplied 5 pcs per roll for mounting |
| Terminal connection wire | For feed connections at the strip ends |
| End plug | Seals the open end of a cut strip section |
Q: Why is this model IP65 while other strips in the range are IP68?
A: This is the only arc-profile model in the range, and its construction is rated IP65 — suited to protected outdoor and splash-exposed signage. For installations requiring full submersion protection, the square-profile 10/12/16/20mm models in this range carry IP68.
Q: What does "dual white" mean on this strip, and how does it differ from Tri-CCT 3-in-1 models elsewhere in the range?
A: This strip ships at one of three fixed colour temperatures — 3000K, 4000K, or 6500K — selected at the time of order and fixed once manufactured. This differs from Tri-CCT 3-in-1 models elsewhere in the range, which carry three colour-temperature dies on the same board.
Q: Why is the profile arc-shaped instead of square like the rest of the range?
A: The arc-shaped W6 × H12mm profile is purpose-built for side-emission through a curved face, giving a rounded, glare-controlled light line for channel letters and curved signage — this is the only non-square profile in the G series.
Q: How fine is the cut interval on this model?
A: 8.33mm, cuttable at every LED position — finer than the cut intervals used on several square-profile models in the range, useful for exact letter and sign dimensions.
Q: Can this strip be used for indoor cabinet lighting instead of signage?
A: It can, but the side-emitting arc optic is specifically optimised for letter and sign applications. For general cabinet lighting, a front-emitting square-profile model in the range will produce more usable light for the same specification.
Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 5m reels, 10 reels per carton totalling 50m, shipped from Guangzhou or Shenzhen.
Most silicone neon strips in this range use a flat square cross-section — this model is the exception. Its arc-shaped W6 × H12mm profile is purpose-built for side-emission, directing light out through the curved side face rather than the flat top, and giving channel letters and edge-lit signage a rounded, glare-controlled light line that a square profile cannot reproduce.
EN
