Key Features

• Energy efficiency class E – One grade above the majority of the 8mm family, clearing procurement screens that exclude class F product.
• 1350 lm/m from 12.0 W/m – Approximately 112 lm/W, higher efficacy than the 12V board of equivalent LED density.
• 24V operation at 0.50 A – Half the current of a comparable 12V strip, reducing conductor loss and extending single-feed run length.
• 320 LEDs per metre – Balanced density: smooth enough for direct-view installations, economical enough for volume projects.
• 50mm cut interval – Practical adjustment granularity for standard cabinet and shelf module widths.
• Dot-free COB emission – Continuous phosphor coating across the full 8mm face, with no visible LED points at close range.
• SDCM ≤5 across six colour temperatures – 2700K to 6500K specified at order, held within a five-step MacAdam ellipse for reel-to-reel consistency.
• L80B20 at 20,000 hours – 80% lumen retention with matching MTBF and 15,000 switching cycles.

Specifications

Materials & Finish

• Construction: flexible COB board with 320 large-die emitters per metre beneath a continuous phosphor layer.
• Profile: W8 × H1.65 ± 0.5 mm, sized for standard 8mm aluminium channel internals.
• Surface treatment: phosphor coating across the full emitting width.
• Colour consistency: SDCM ≤5, ensuring adjacent reels and separate runs appear as the same white.
• Thermal range: -25 °C to +45 °C operating; -40 °C to +60 °C storage.
• Photometric stability: L80B20 at 20,000 hours.
• Mechanical: bend, fold, and twist tolerant; 15,000 rated switching cycles.

Assembly & Installation

Tools needed: scissors or side cutters, clean dry cloth.

Steps:

1. Total the run length and multiply by 12W to size the 24V driver, adding 20% headroom.
2. Clean and dry the mounting surface completely.
3. Cut only at the marked 50mm intervals.
4. Peel the backing film and press the strip along its length, working from one end.
5. Connect via the 2P-8 accessory range — board connector, lead wire, in-line joiner, or L/T/cross transition.
6. Apply power; the strip illuminates immediately.

Driver sizing note specific to class E: the efficiency rating applies to the strip, not the system. Pairing a class E strip with an inefficient or oversized driver erodes the gain that justified specifying it. Where the declared class matters for a tender, size the driver close to actual load and check its own efficiency figure.

Applications

• Kitchen under-cabinet task lighting – 1350 lm/m provides full worktop illumination at a specification-compliant efficiency class.
• Contract and commercial cabinetry – Class E rating clears procurement thresholds on tendered projects.
• Cove and ceiling perimeter lighting – Lower current draw supports longer continuous runs from one feed.
• Retail display shelving – Even emitting face across 8mm width for consistent merchandise presentation.
• Wardrobe and dressing room interiors – Bright, efficient illumination for garment visibility.
• TV backlighting and feature walls – Smooth dot-free line behind panel edges.
• Indoor skirting and floor-level detail – Continuous linear runs along architectural reveals.

Customization

Certifications

• CE
• CB
• RoHS
• Test reports available on request

Packing & Logistics

• Packing type: reel + ESD bag + carton
• Packing quantity: 5 m per roll, 100 rolls per carton, 500 m total
• MOQ: 50 sets
• Lead time: 15–21 days
• Port of loading: Guangzhou / Shenzhen

Service

• Warranty: 2 years
• Samples: free samples on standard items; freight collect
• Response time: within 2 hours
• After-sales: technical support by email or phone throughout the warranty period. Report quality issues with photographs, video, and the item number; verified defects are resolved by replacement parts or replacement units shipped with your next order, or by credit where no follow-up order is scheduled. Faults caused by physical damage, unauthorised modification, or use outside the rated environmental conditions fall outside warranty cover.
• Contact: tel: +86 18933392222 | email: [email protected] | global.joineonlux.com

FAQ

Q: What is the practical difference between energy class E and class F?
A: Class E indicates higher luminous efficacy — more light output per watt consumed. This strip achieves roughly 112 lm/W against the 120 lm/W of the 12V 320-LED board at lower absolute output. Where tenders or retail listings filter on declared class, a class E product passes screens that exclude class F.

Q: How does this compare with the 12V version of the same 320-LED strip?
A: Same LED count and same 8mm profile. This 24V model produces 1350 lm/m at 12W and class E; the 12V model produces 1200 lm/m at 10W and class F. Choose 24V for new installations, longer runs, and efficiency-sensitive specifications; choose 12V only where an existing 12V supply must be reused.

Q: How far can a single run extend at 24V?
A: Lower current draw at 24V reduces voltage drop significantly compared with 12V. In practice a single feed comfortably serves runs beyond what a 12V board of the same wattage would support. For very long installations, inject power at both ends and verify brightness at the far end during commissioning.

Q: Can I use this strip in a bathroom or covered outdoor area?
A: No. IP20 offers no moisture protection. This is an indoor, dry-location product only. Bathrooms, sheltered patios, and areas subject to condensation all require a higher IP rating.

Q: Does the strip need a controller?
A: No. It illuminates as soon as power is applied. Only a suitably sized 24V DC driver is required.

Q: What are the MOQ, lead time, and shipping port?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 5m reels, 100 reels per carton totalling 500m, shipped from Guangzhou or Shenzhen.