Core Features

• CRI 90 — the only model in the L series at this rating — every other strip in the range is Ra 80; this one restores saturated reds, skin tones, and subtle colour differences that Ra 80 visibly distorts.
• Accurate rendering where colour is the decision criterion — under Ra 80 a red garment reads flat and two similar fabric samples look closer than they are; Ra 90 restores the difference.
• 1700 lumens per metre from 14W — roughly 121 lm/W; a deliberate trade-off against the 160 lm/W class C models, because accurate deep-red output requires phosphor conversion that standard chips skip.
• 180 LEDs/M for uniform colour across the run — density keeps both output and colour consistent, avoiding the patchiness that would undermine the point of a high-CRI specification.
• 16.7mm cut interval — the finest pitch among the W10 models in the range, allowing close length matching in display cases and fitted retail joinery.
• Six colour temperature options at order — 2700K, 3000K, 3500K, 4000K, 5000K, 6500K specified when ordering; the strip is manufactured to a fixed colour temperature and is not field-switchable.
• Self-adhesive backing — double-sided tape film bonds directly to aluminium channels, display case interiors, and shelf undersides without mounting clips.
• CE / CB / RoHS certified — manufacturer-held certifications supporting European and international B2B procurement.

Application Scenarios

• Apparel and fashion retail — the decisive use case; fabric colours and subtle tone differences read accurately under Ra 90 where Ra 80 flattens them.
• Fresh food and butchery counters — saturated reds in meat and produce render naturally rather than greying out as they do under Ra 80.
• Cosmetics and beauty counters — skin tones and product shades render accurately, which is the entire basis of the purchase decision.
• Jewellery and watch display — metal tones, gemstone colour, and fire are rendered faithfully.
• Gallery, museum, and art display — accurate colour rendering for works where fidelity matters.
• Colour-critical task areas — print proofing, textile inspection, quality control benches, and photography fill where colour accuracy is required.

Technical Specifications

• Model No. — JNL-L-012V-2835-0180-10-S1XX
• Item No. — 101300127
• LED type — 2835 SMD
• LED quantity — 180 PCS/m
• Rated voltage — 12 V DC
• Rated power — 14 W/m ± 10%
• Input current — 1.17 A @ 1m
• Luminous flux — 1700 lm/m
• Colour temperature — 2700 / 3000 / 3500 / 4000 / 5000 / 6500 K (specified at order)
• Colour rendering index — Ra 90 (highest in the L series)
• SDCM — ≤ 5
• Beam angle — 120°
• Lumen maintenance — L80B20 @ 20,000 h
• Energy efficiency class — E
• Ingress protection — IP20 (indoor dry location only)
• Outline dimensions — W10 × H1.2 ± 0.5 mm
• Surface material — Bare PCB (no silicone sleeve)
• Cut length — 16.7 mm
• Mounting method — Double-sided adhesive tape film
• Dimming method — Turn on the power and it lights up
• Switching cycles — 15,000 times
• Operating temperature — -25°C to +45°C
• Storage temperature — -40°C to +60°C
• Relative humidity — 10–90%
• MTBF — 20,000 h
• Connector compatibility — 2P board connector, 2P wire connectors (single & double end), 2P board-to-board straight / L-shape / T-shape / +-shape, 2P DC-head variant
• Packing — Reel + ESD bag + Inner box + Carton
• Packing quantity — 5 m/roll × 100 rolls = 500 m per carton
• Certification — CE / CB / RoHS

Contact

Request quotation, datasheet, or free sample length: tel: +86 18933392222 | email: [email protected] — OEM, bulk order, and distributor pricing available.