Among the 8mm mains-voltage COB strips in the D series, this is the brightest: 360 LEDs per metre producing 1100 lm/m from 12W. Where the entry 240-LED model suits general cove and outline work, this higher-density board is specified when a mains-connected installation needs to compete on output with a low-voltage equivalent.
It carries the same connection advantage across the range — a plug-in power cord replaces the low-voltage driver entirely, removing a component and a fault point from long architectural runs. Supply tolerance is wide at 220–240V and 47–63 Hz, covering both major mains frequency standards from one product.
Colour rendering is Ra 70, positioning this as an output-focused rather than colour-critical specification — appropriate for indirect cove and outline lighting where brightness and coverage matter more than colour accuracy. The strip is supplied on 10m reels, cuts every 100mm, rated IP43, energy class F, and offers six colour temperatures from 2700K to 6500K specified at order.
| Parameter | Details |
|---|---|
| Model No. | JNL-D-220V-COB-0360-08-S1XX-010-YYYY-12-43 |
| Item No. | 105650010 |
| Rated power | 12.0 W/m ± 10% |
| Rated voltage | AC 220 V |
| Input voltage range | AC 220–240 V |
| Rated frequency | 50 Hz (range 47–63 Hz) |
| Input current | 0.06 A |
| Power factor | ≥ 0.9 |
| LED type | COB, large die 6 × 20 mil |
| LED quantity | 360 PCS/m |
| Luminous flux | 1100 lm/m (@6500K) |
| Colour temperature | 2700 / 3000 / 3500 / 4000 / 5000 / 6500 K (specified at order) |
| CRI | Ra 70 |
| SDCM | ≤ 5 |
| Beam angle | 120° |
| Lumen maintenance | L80B20 @ 20,000 h |
| Energy efficiency class | F |
| Ingress protection | IP43 |
| Outline dimensions | W8 × H1.65 ± 0.5 mm |
| Surface material | Sprayed silicone |
| Cut length | 100 mm |
| Mounting | Double-sided adhesive tape film |
| Dimming method | Turn on the power and it lights up |
| Switching cycles | 15,000 times |
| Operating temperature | -25 °C to +45 °C |
| Relative humidity | 10–90% |
| Storage temperature | -40 °C to +60 °C |
| MTBF | 20,000 h |
| Packing | Reel + ESD bag + carton |
| Packing quantity | 10 m/roll × 50 pcs = 500 m per carton |
⚠️ This product connects directly to mains voltage. Installation must be carried out by a qualified electrician in accordance with local wiring regulations.
Steps:
Choosing between the 240-LED and 360-LED mains models: where output is the priority — a cove line that needs to visually compete with a brighter fixture, or a longer run where lumens per metre matters more than fine colour rendering — this 360-LED board is the correct specification over the 240-LED entry model.
| Option | Details |
|---|---|
| Colour temperature | 2700 / 3000 / 3500 / 4000 / 5000 / 6500 K, specified at order |
| CRI | Customisable on request |
| Power | Customisable on request |
| Length | 10 m per roll standard; cuttable every 100 mm |
| Packaging | Reel + ESD bag + carton standard; neutral or branded packaging available |
| OEM / ODM | Private label and custom packaging supported |
| MOQ | 50 sets |
| Accessory | Code |
|---|---|
| Universal mounting clip | KC-8 |
| Concealed mounting clip | YSK-8 |
| Board connector | OA2P-8 |
| Board connector with DC Dupont head | OA2P-8-DC |
| Single-ended board lead wire | OA2P-8-1 |
| Double-ended lead wire | OA2P-8-2 |
| In-line joiner | OB2P-8 |
| L-shaped board transition | OB2P-8-L |
| L-shaped wire transition | YOA2P-8-L |
| T-shaped board transition | OB2P-8-T |
| Cross board transition | OB2P-8-十 |
Q: How does this compare with the 240-LED AC 220V model?
A: Higher density (360 vs 240 LEDs per metre) and higher output (1100 vs 900 lm/m) at slightly higher power draw. Choose this model where brightness is the priority; the 240-LED model is the more economical choice for general cove and outline work.
Q: Is CRI 70 sufficient for architectural cove lighting?
A: For indirect cove and outline applications where the strip itself is not directly viewed and colour rendering of adjacent surfaces is not critical, Ra70 is standard and cost-effective. Where colour accuracy matters — retail or display applications — specify the Ra90 model in the D series mains range instead.
Q: Does this need a low-voltage driver?
A: No, it connects to mains via a plug-in power cord, removing the driver entirely from the installation.
Q: What voltage regions is this suited to?
A: AC 220–240V at 47–63 Hz, covering both 50 Hz and 60 Hz supply regions. For 110–135V markets, specify the AC 127V model in the D series.
Q: Who should install this strip?
A: A qualified electrician, in accordance with local wiring regulations.
Q: What are the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 10m reels, 50 reels per carton totalling 500m, shipped from Guangzhou or Shenzhen.
Among the 8mm mains-voltage COB strips in the D series, this is the brightest: 360 LEDs per metre producing 1100 lm/m from 12W. Where the entry 240-LED model suits general cove and outline work, this higher-density board is specified when a mains-connected installation needs to compete on output with a low-voltage equivalent.
EN
