This is the high-output counterpart to the high-density 336-LED model in the same 20x20mm profile: 240 2835 LEDs per metre at 24V DC, delivering 800 lm/m from 15W — substantially brighter than the 500 lm/m of the denser-LED equivalent, at the cost of a slightly less refined emitting texture at very close range.
For facade, cove, and architectural accent lighting where brightness visible from a distance is the primary requirement, this model's output-focused specification is the more practical choice than the density-focused 336-LED alternative. Like the rest of the 20x20mm range, it carries a compact splice design with small joint size and no dark zone, keeping multi-reel facade runs visually continuous.
Construction is gas-phase silicone, front-emitting, IP68 rated, with a -25°C to +45°C operating range. Colour temperature is specified at order from the Tri-CCT 3-in-1 range: 3000K, 4000K, or 6500K, cutting every 25mm.
| Parameter | Details |
|---|---|
| Model No. | JNL-G-024V-2835-0240-10-S1XX-005-YYYY-15-68 |
| Item No. | 103500002 |
| Rated power | 15.0 W/m ± 10% |
| Rated voltage | 24 V DC |
| Input current | 0.63 A |
| LED type | 2835 |
| LED quantity | 240 PCS/m |
| Luminous flux | 800 lm/m |
| Colour temperature | Tri-CCT 3000 / 4000 / 6500 K (3-in-1, specified at order) |
| Colour rendering index | Ra 80 |
| SDCM | ≤ 5 |
| Beam angle | 120° |
| Lumen maintenance | L80B20 @ 50,000 h |
| Energy efficiency class | G |
| Ingress protection | IP68 |
| Outline dimensions | W20 × H20 ± 0.5 mm (square, dual colour) |
| Surface material | Silicone |
| Cut length | 25 mm |
| Mounting | Fixed Clamp |
| Dimming method | Turn on the power and it lights up |
| Switching cycles | 15,000 times |
| Operating temperature | -25 °C to +45 °C |
| Relative humidity | 10–90% |
| Storage temperature | -40 °C to +60 °C |
| MTBF | 50,000 h |
| Packing | ESD bag + box + carton |
| Packing quantity | 5 m/roll × 8 rolls = 40 m per carton |
Tools needed: scissors or side cutters, clean dry cloth, fixed clamp accessories.
Steps:
Choosing between the two 20x20mm models: specify this 240-LED, 800 lm/m model where facade or cove visibility from a distance is the priority. Specify the 336-LED, 500 lm/m model where the strip is viewed more closely and emission smoothness is the priority.
| Option | Details |
|---|---|
| Colour temperature | Tri-CCT 3000 / 4000 / 6500 K, specified at order |
| CRI | Customisable on request |
| Luminous flux | Customisable on request |
| Length | 5 m per roll standard; cuttable every 25 mm |
| Packaging | ESD bag + box + carton standard; neutral or branded packaging available |
| OEM / ODM | Private label and custom packaging supported |
| MOQ | 50 sets |
| Accessory | Description |
|---|---|
| Fixed Clamp | Supplied 5 pcs per roll for mounting |
| Metal terminal connection wire | For durable, low-resistance feed connections |
| Nylon terminal connection wire | Alternative lightweight connection option |
| End plug | Seals the open end of a cut strip section |
Q: How does this compare with the Ultra Bright side-emitting model in the same profile size?
A: This is a front-emitting strip at 800 lm/m; the Ultra Bright model in the range is side-emitting at 1500 lm/m, positioned for channel letter and facade signage requiring maximum brightness through a side-view optic. Choose based on whether front or side emission suits your installation.
Q: What size driver do I need for a 5 metre run?
A: At 15W per metre, a 5 metre run draws 75W nominal. Size the driver with at least 20% headroom, so a minimum 90W-rated 24V driver.
Q: Is this the same output as the 15-number 16x16mm model?
A: Very close — both deliver similar wattage per metre, but this 20x20mm model reaches 800 lm/m against 900 lm/m on the 16x16mm equivalent at the same 15W rating, reflecting the different LED type and profile geometry.
Q: How does the small-joint splicing help on a long facade run?
A: It minimises the visible gap at connection points between reels, so a facade run built from multiple 5m reels appears continuous rather than segmented at each joint.
Q: Can the colour temperature be changed on site?
A: No, it is fixed at manufacture from the Tri-CCT 3-in-1 range specified at order.
Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 5m reels, 8 reels per carton totalling 40m, shipped from Guangzhou or Shenzhen.
This is the high-output counterpart to the high-density 336-LED model in the same 20x20mm profile: 240 2835 LEDs per metre at 24V DC, delivering 800 lm/m from 15W — substantially brighter than the 500 lm/m of the denser-LED equivalent, at the cost of a slightly less refined emitting texture at very close range.
EN
