Construction follows the G series silicone neon standard: gas-phase silicone jacket, continuous front-emitting light face with no visible LED dots, and IP68 protection for both indoor and outdoor use. At 180 2835 LEDs per metre and 24V DC, output is 500 lm/m, with a 33.33mm cut interval and the standard fixed clamp mounting system.
Most white-light strips ship in one fixed colour temperature, forcing a choice at order time that cannot be revisited on site. This Tri-CCT 3-in-1 silicone LED neon strip is manufactured with three colour temperature channels built into the same board — 3000K, 4000K, and 6500K — giving installers and specifiers flexibility that a single-temperature strip does not offer, while remaining a fixed product once the temperature is set at manufacture.
Beyond the colour flexibility, this model adds genuine mechanical flexibility: 360° free bending, described in the product line as "Ruyi bend" — a design that allows the strip to curve smoothly in any direction without kinking or cracking the silicone jacket, unlike strips that only bend cleanly along one plane. That makes it suited to curved cabinetry, rounded architectural details, and any installation where the light path is not a straight line.
| Parameter | Details |
|---|---|
| Model No. | JNL-G-024V-2835-0180-05-S1XX-005-YYYY-10-68 |
| Item No. | 103400005 |
| Rated power | 10 W/m ± 10% |
| Rated voltage | 24 V DC |
| Input current | 0.42 A |
| LED type | 2835 |
| LED quantity | 180 PCS/m |
| Luminous flux | 500 lm/m |
| Colour temperature | Tri-CCT 3000 / 4000 / 6500 K (3-in-1, specified at order) |
| Colour rendering index | Ra 80 |
| SDCM | < 5 |
| Beam angle | 120° |
| Lumen maintenance | L80B20 @ 50,000 h |
| Energy efficiency class | G |
| Ingress protection | IP68 |
| Outline dimensions | W10 × H10 ± 0.5 mm |
| Surface material | Silicone |
| Cut length | 33.33 mm |
| Mounting | Fixed Clamp |
| Dimming method | Turn on the power and it lights up |
| Switching cycles | 15,000 times |
| Operating temperature | -25 °C to +45 °C |
| Relative humidity | 10–90% |
| Storage temperature | -40 °C to +60 °C |
| MTBF | 50,000 h |
| Packing | Box + carton |
| Packing quantity | 5 m/roll × 10 rolls = 50 m per carton |
Tools needed: scissors or side cutters, clean dry cloth, fixed clamp accessories.
Steps:
Bend radius note: while the 360° free bending design tolerates curves more readily than a standard strip, always test-bend a short offcut to the tightest planned radius before committing the full run, particularly on cold installation sites where silicone stiffens slightly.
| Option | Details |
|---|---|
| Colour temperature | Tri-CCT 3000 / 4000 / 6500 K, specified at order |
| CRI | Customisable on request |
| Luminous flux | Customisable on request |
| Length | 5 m per roll standard; cuttable every 33.33 mm |
| Packaging | Box + carton standard; neutral or branded packaging available |
| OEM / ODM | Private label and custom packaging supported |
| MOQ | 50 sets |
| Accessory | Description |
|---|---|
| Fixed Clamp | Supplied 5 pcs per roll for mounting |
| Metal terminal connection wire | For durable, low-resistance feed connections |
| Nylon terminal connection wire | Alternative lightweight connection option |
| End plug | Seals the open end of a cut strip section |
Q: Can I switch between the three colour temperatures after installation?
A: No, the Tri-CCT 3-in-1 designation refers to the strip's manufacturing option range — 3000K, 4000K, or 6500K is selected and fixed at the time of order. This is a fixed-temperature product once manufactured.
Q: What does "360° free bending" mean in practice?
A: The strip's silicone jacket and internal circuit are designed to curve in any direction without kinking or cracking, unlike rigid strips that only bend cleanly in one plane. This suits curved cabinetry, rounded architectural features, and non-linear signage routing.
Q: Is this a front-emitting or side-emitting strip?
A: Front-emitting. The light is viewed straight-on through the top face of the strip. For applications needing the light viewed from the side — such as channel letter signage — the side-emitting models elsewhere in the G series are the correct specification.
Q: Can this strip be installed outdoors?
A: Yes, IP68 rating supports outdoor and even submerged installation, within the -25°C to +45°C operating range.
Q: What is the difference between this model and the every-LED cuttable version?
A: This model cuts every 33.33mm; the every-LED cuttable version in the range cuts every 6mm for finer length precision, at a different LED density and output. Choose based on whether fine length matching is genuinely required for the installation.
Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 5m reels, 10 reels per carton totalling 50m, shipped from Guangzhou or Shenzhen.
Construction follows the G series silicone neon standard: gas-phase silicone jacket, continuous front-emitting light face with no visible LED dots, and IP68 protection for both indoor and outdoor use. At 180 2835 LEDs per metre and 24V DC, output is 500 lm/m, with a 33.33mm cut interval and the standard fixed clamp mounting system.
EN
