Description
Both combinations sit on one board in the same 10 × 3.5 mm slim dome profile used by the single-colour models, so the strip disappears into a shallow reveal while carrying two separately wired channels. Output is 1200 lumens per metre at 12 W from 192 LEDs. Note that the datasheet lists the dimming method as "turn on the power and it lights up" and does not describe a switching mechanism, so the change between the two colours is made on the supply side — specify the switching arrangement you need when ordering rather than assuming a controller is included.
Two practical points. Mounting here is by buckle and screw, not the adhesive used on the other 10 × 3.5 mm dome models — so despite the shared profile this one is fixed mechanically, which suits rough or porous substrates where adhesive would fail. Reel length is 50 m against the 100 m of those adhesive models, so it suits projects made up of several runs rather than one long one. Cutting is at 125 mm intervals. The exact colour combination should be confirmed at order stage. Rated IP65 for sheltered outdoor use, with CE, CB, and RoHS certification held by the manufacturer.