Core Features

• Cuttable at any point along the run — the only model in the L series without a fixed cut interval, eliminating wasted offcuts and dark end-gaps where run length is dictated by joinery or existing recesses.
• 1200 lumens per metre at 10W — within 100 lm/m of the comparable fixed-pitch model, making the two interchangeable for most accent and shelf work.
• Energy efficiency class E — matches the better-performing models in the range.
• Six colour temperature options at order — 2700K, 3000K, 3500K, 4000K, 5000K, 6500K specified when ordering; the strip is manufactured to a fixed colour temperature and is not field-switchable.
• Self-adhesive backing — double-sided tape film bonds directly to aluminium channels, shelf undersides, and cabinet interiors without mounting clips.
• Low 0.83A per metre draw — modest supply requirements for the output level.
• L80B20 at 20,000 hours — retains 80% of initial output at 20,000 hours with MTBF rated at the same figure.
• CE / CB / RoHS certified — manufacturer-held certifications supporting European and international B2B procurement.

Application Scenarios

• Retrofit runs into existing recesses — the decisive use case; cut to whatever length the existing opening dictates rather than adjusting the opening to suit the strip.
• Shelf and bookcase lighting — cut exactly to each shelf width, avoiding the dark section left when a fixed-pitch strip cannot reach the end of a run.
• Fitted furniture and joinery — precise fitting to internal carcass dimensions without planning around a cut interval.
• Display case and showcase interiors — exact length matching to case dimensions for clean, gap-free illumination.
• Indoor accent and feature lighting — 1200 lm/m provides even accent output in residential and commercial settings.
• DIY and small-batch projects — no need to calculate cut intervals or hold stock in specific lengths.

Technical Specifications

• Model No. — JNL-L-024V-2835-0120-08-S1XX
• Item No. — 101300234
• LED type — 2835 SMD
• LED quantity — 120 PCS/m
• Rated voltage — 12 V DC per specification sheet (model code carries a 24V designation — confirm against your batch before specifying power supplies)
• Rated power — 10 W/m ± 10%
• Input current — 0.83 A @ 1m
• Luminous flux — 1200 lm/m
• Colour temperature — 2700 / 3000 / 3500 / 4000 / 5000 / 6500 K (specified at order)
• Colour rendering index — Ra 80
• SDCM — ≤ 5
• Beam angle — 120°
• Lumen maintenance — L80B20 @ 20,000 h
• Energy efficiency class — E
• Ingress protection — IP20 (indoor dry location only)
• Outline dimensions — W8 × H1.2 ± 0.5 mm
• Surface material — Bare PCB (no silicone sleeve)
• Cut length — Cuttable at any point per specification sheet
• Mounting method — Double-sided adhesive tape film
• Dimming method — Turn on the power and it lights up
• Switching cycles — 15,000 times
• Operating temperature — -25°C to +45°C
• Storage temperature — -40°C to +60°C
• Relative humidity — 10–90%
• MTBF — 20,000 h
• Connector compatibility — 2P board connector, 2P wire connectors (single & double end), 2P board-to-board straight / L-shape / T-shape / +-shape, 2P DC-head variant
• Packing — Reel + ESD bag + Inner box + Carton
• Packing quantity — 5 m/roll × 100 rolls = 500 m per carton
• Certification — CE / CB / RoHS

Contact

Request quotation, datasheet, or free sample length: tel: +86 18933392222 | email: [email protected] — OEM, bulk order, and distributor pricing available.