Key Features

• 25mm cut interval – Half the granularity of the standard 320-LED board, matching length precisely to short display compartments and glass shelving sections.
• 480 LEDs per metre for a smoother emitting face – Higher density reduces visible banding at shallow viewing angles, relevant on glass shelves and cabinet edges viewed close up.
• 1050 lm/m from 12.0 W/m – Solid task-level output for display and cabinet lighting applications.
• Direct 12V DC compatibility – Fits existing 12V systems without a driver change; suited to retrofit and short-run installations.
• 8mm slim profile – Fits standard 8mm aluminium channels used across cabinet and shelving hardware.
• Dot-free continuous emission – COB phosphor coating produces an unbroken light line even at the closer viewing distances typical of display cabinet installations.
• Six colour temperatures, SDCM ≤5 – 2700K to 6500K specified at order, held within a five-step MacAdam ellipse.
• L80B20 at 20,000 hours – 80% lumen retention with matching MTBF, 15,000 rated switching cycles.

Specifications

Materials & Finish

• Construction: flexible COB board with 480 large-die emitters per metre beneath a continuous phosphor layer.
• Profile: W8 × H1.65 ± 0.5 mm, sized for standard 8mm aluminium channel internals.
• Surface treatment: phosphor coating across the full emitting width, producing a smoother visual result at high density.
• Colour consistency: SDCM ≤5 across six colour temperature options.
• Thermal range: -25 °C to +45 °C operating; -40 °C to +60 °C storage.
• Photometric stability: L80B20 at 20,000 hours.
• Mechanical: flexible, bend and twist tolerant; 15,000 switching cycles.

Assembly & Installation

Tools needed: scissors or side cutters, clean dry cloth, measuring tape.

Steps:

1. Measure the compartment or shelf section precisely — this strip's advantage is close length matching, so accurate measurement is worth the extra minute.
2. Confirm the 12V supply capacity against 12W per metre for the run.
3. Clean and dry the mounting surface thoroughly.
4. Cut only at the marked 25mm intervals.
5. Peel the backing film and press the strip firmly along its length.
6. Connect using the 2P-8 accessory range and apply power; the strip illuminates immediately.

Fitting tip for display cabinets: because the cut interval is 25mm, most standard shelf and compartment widths can be matched within 12.5mm of the ideal length in either direction. Measure to the nearest 25mm increment before ordering quantities for a multi-unit fit-out to avoid systematic under- or over-ordering.

Applications

• Jewellery and display cabinets – 25mm cut precision matches short glass shelf sections without visible gaps.
• Retail showcase lighting – High-density emitting face reduces banding on close-viewed glass surfaces.
• Wine cabinets and bar shelving – Even light distribution across narrow shelf faces.
• Bed head and under-bed lighting – 12V compatibility suits low-voltage bedroom installations.
• Wardrobe interiors and shoe display – Fine length matching for compartmentalised storage.
• Automotive and vehicle showroom displays – Direct 12V compatibility for vehicle-adjacent lighting.
• Museum and exhibition cases – Smooth, dot-free light for close object viewing.

Customization

Certifications

• CE
• CB
• RoHS
• Test reports available on request

Packing & Logistics

• Packing type: reel + ESD bag + carton
• Packing quantity: 5 m per roll, 100 rolls per carton, 500 m total
• MOQ: 50 sets
• Lead time: 15–21 days
• Port of loading: Guangzhou / Shenzhen

Service

• Warranty: 2 years
• Samples: free samples on standard items; freight collect
• Response time: within 2 hours
• After-sales: technical support by email or phone throughout the warranty period. Report quality issues with photographs, video, and the item number; verified defects are resolved by replacement parts or replacement units shipped with your next order, or by credit where no follow-up order is scheduled. Faults caused by physical damage, unauthorised modification, or use outside the rated environmental conditions fall outside warranty cover.
• Contact: tel: +86 18933392222 | email: [email protected]

FAQ

Q: Why does this strip cut every 25mm when other models cut every 50mm?
A: The finer cut interval matches the higher 480-LED density and is specifically useful for short display compartments and glass shelving where a 50mm granularity would leave a visible unlit gap or force an overhang. Lower-density boards use wider cut intervals because their LED spacing is naturally wider.

Q: Does higher LED density actually look different?
A: Yes, at close viewing distance. 480 LEDs per metre produces a smoother, more evenly diffused light line than a 252 or 320-LED board, with reduced risk of visible banding when the strip is viewed along a glass shelf edge or from a shallow angle.

Q: Should I choose the 12V or 24V version of this 480-LED strip?
A: Choose 12V for retrofit into existing 12V systems or for shorter runs where current draw is not a limiting factor. The 24V version of the same LED count delivers higher output at 1400 lm/m with energy class E rather than F — the better choice for new, longer installations.

Q: Can this be installed in a cold storage display or wine cellar?
A: The operating range is -25°C to +45°C, which covers most wine storage and refrigerated display conditions. IP20 rating means it must remain in a dry environment — not exposed to condensation or direct moisture contact.

Q: What accessories are available for corner and branch connections?
A: The full 2P-8 range covers board connectors, DC Dupont leads, single and double lead wires, in-line joiners, and L, T, and cross transitions — all solderless, suited to multi-compartment display fit-outs.

Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 5m reels, 100 reels per carton totalling 500m, shipped from Guangzhou or Shenzhen.