Key Features

• CRI 90 at mains voltage – Genuine colour-accurate lighting without a low-voltage driver, uncommon in the mains-connected strip category.
• 1000 lm/m from 11.0 W/m – The highest output among the D series high-CRI mains models.
• Plug-in power cord connection – No low-voltage driver to specify, mount, or maintain across the installation.
• 288 LEDs per metre – Density calibrated for both brightness and the accurate colour rendering the CRI 90 rating requires.
• 8mm slim profile – Standard channel compatibility for mains-voltage architectural and retail fittings.
• Wide supply tolerance – AC 220–240V at 47–63 Hz.
• Power factor ≥0.9 – Efficient mains loading.
• Six colour temperature options – 2700K to 6500K specified at order, all rated CRI 90.

Specifications

Materials & Finish

• Construction: COB flexible strip with continuous phosphor emitting surface, formulated for CRI 90 colour rendering at mains voltage.
• Profile: W8 × H1.65 ± 0.5 mm.
• Surface treatment: sprayed silicone, providing IP43 protection.
• LED die: large die 6 × 20 mil.
• Colour performance: Ra 90 with SDCM ≤5.
• Thermal range: -25 °C to +45 °C operating; -40 °C to +60 °C storage.
• Photometric stability: L80B20 at 20,000 hours with matching MTBF.

Assembly & Installation

⚠️ This product connects directly to mains voltage. Installation must be carried out by a qualified electrician in accordance with local wiring regulations.

Tools needed: side cutters, clean dry cloth, includes plug head and sleeve for the power connection.

Steps:

1. Plan the run and confirm total length against the supply circuit rating at 11W per metre.
2. Clean and dry the mounting surface.
3. Cut only at the marked 500mm intervals — the widest interval in the range, so plan section lengths in whole 500mm increments from the outset.
4. Peel the backing film and press the strip along the run.
5. Fit the plug head and protective sleeve to the strip end following the supplied connection instructions.
6. Verify all connections are secure and correctly insulated before energising.

Planning note on the 500mm cut interval: this is the widest cut pitch in the D series. Measure the installation run early and design section breaks around 500mm multiples rather than assuming fine adjustment will be possible on site — unlike most other models in the range, there is limited flexibility to fine-tune length after the design is fixed.

Applications

• Retail display lighting – CRI 90 accurately renders merchandise colour at mains-voltage installation scale.
• Commercial ceiling coves with colour-critical requirements – Architectural runs where finish and material colour must read accurately.
• Hospitality feature lighting – Restaurant and hotel installations combining direct mains connection with accurate colour rendering.
• Gallery and exhibition lighting – Colour-accurate illumination for artwork and display objects at scale.
• Showroom and automotive display lighting – Accurate paint and material colour rendering in large-format retail spaces.
• Premium building outline and facade lighting – Where CRI matters even in indirect architectural applications.

Customization

Certifications

• CE
• CB
• RoHS
• Test reports available on request

Packing & Logistics

• Packing type: reel + ESD bag + carton
• Packing quantity: 10 m per roll, 50 rolls per carton, 500 m total
• MOQ: 50 sets
• Lead time: 15–21 days
• Port of loading: Guangzhou / Shenzhen

Service

• Warranty: 2 years
• Samples: free samples on standard items; freight collect
• Response time: within 2 hours
• After-sales: technical support by email or phone throughout the warranty period. Report quality issues with photographs, video, and the item number; verified defects are resolved by replacement parts or replacement units shipped with your next order, or by credit where no follow-up order is scheduled. Faults caused by physical damage, unauthorised modification, or use outside the rated environmental conditions fall outside warranty cover.
• Contact: tel: +86 18933392222 | email: [email protected]

FAQ

Q: Is this the only high-CRI option among the mains-voltage COB strips?
A: Within this batch, yes — this is the CRI 90 model in the AC 220V range. Other mains-voltage models in the D series are rated Ra70 or Ra80, suited to indirect architectural applications where colour accuracy is not the priority.

Q: Why is the cut interval 500mm — is that a mistake?
A: No, this is correct for this specific model. It is the widest cut pitch in the D series, reflecting the circuit design at this LED density and mains voltage combination. Plan installation sections in 500mm multiples from the design stage.

Q: Does this strip need a low-voltage driver?
A: No. It connects to mains supply through a plug-in power cord with a protective sleeve at the connection point. No low-voltage driver is required.

Q: Who should install this product?
A: A qualified electrician, in accordance with local wiring regulations. This is a mains-voltage product and unsuitable for DIY installation.

Q: Can this be used in a retail display requiring accurate merchandise colour?
A: Yes, this is exactly the application it is specified for — CRI 90 rendering at commercial installation scale, without the driver infrastructure a low-voltage equivalent would require.

Q: What are the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 10m reels, 50 reels per carton totalling 500m, shipped from Guangzhou or Shenzhen.