Every range needs a colour option, and most buyers specifying one are not looking for architectural lighting — they are looking for ambience in a bedroom, a bar, a gaming room, or a party installation, where the point is that the light can change. This is that product in the L series: standard RGB on the same 8 mm bare board platform as the single-colour strip, so it installs with the same adhesive and the same channels, with colour and mode set by the matched controller.
It is worth being clear about what "standard RGB" means here, because the term covers two quite different products. This is a common four-pin RGB strip: the whole run shows one colour at a time, and the colour and any transition are set on the controller. It is not individually addressable — you cannot program one section red while the next section is blue, and it does not carry the per-pixel control that an addressable or digital strip would. For whole-room colour washing and ambience, which is what this is for, that distinction costs nothing and the product is considerably simpler to wire.
Construction follows the rest of the range: 120 LEDs per metre on an 8 mm bare board, 12 V, 12 W and 1.0 A per metre, with a 25 mm cut interval that suits room-scale runs. Connection is 4P rather than the 2P used on single-colour strip, since red, green, and blue each need a channel plus the common return — so a 4-pin controller and 4-pin connectors are required, and they are not interchangeable with the 2P parts used elsewhere in the range. The specification sheet does not state a lumen output or a colour rendering index for this model; measured values are available on request from our engineering team. Rated IP20 for indoor dry-location use, with CE, CB, and RoHS certification held by the manufacturer.
Request quotation, datasheet, or free sample length: tel: +86 18933392222 | email: [email protected] — OEM, bulk order, and distributor pricing available.
Every range needs a colour option, and most buyers specifying one are not looking for architectural lighting — they are looking for ambience in a bedroom, a bar, a gaming room, or a party installation, where the point is that the light can change. This is that product in the L series: standard RGB on the same 8 mm bare board platform as the single-colour strip, so it installs with the same adhesive and the same channels, with colour and mode set by the matched controller.
EN
