This strip combines two flexibility features the G series generally offers separately: 360° free bending for curved routing, and Ruyi cut, the every-LED cut design that allows trimming at 6mm intervals rather than a wider fixed cut point. Together they make this one of the most installation-flexible strips in the 10x10mm Tri-CCT range — suited to curved runs that also need to terminate at a precise, non-standard length.
At 168 2025-type LEDs per metre and 12V DC, output is 440 lm/m, drawing 0.83A per metre. This is a front-emitting design: the light is viewed straight-on through the strip's top face, distinct from the side-emitting models in the range that direct light out through the side profile for channel letter and signage applications.
Construction is the same gas-phase silicone jacket used across the G series, chosen for a soft touch and continuous, dot-free emitting surface. IP68 rating supports both indoor cabinet work and outdoor cove, landscape, and accent installations within a -25°C to +45°C operating range. Colour temperature is specified at order from the Tri-CCT 3-in-1 range: 3000K, 4000K, or 6500K.
| Parameter | Details |
|---|---|
| Model No. | JNL-G-012V-2025-0168-05-S1XX-005-YYYY-10-68 |
| Item No. | 103300015 |
| Rated power | 10 W/m ± 10% |
| Rated voltage | 12 V DC |
| Input current | 0.83 A |
| LED type | 2025 |
| LED quantity | 168 PCS/m |
| Luminous flux | 440 lm/m |
| Colour temperature | Tri-CCT 3000 / 4000 / 6500 K (3-in-1, specified at order) |
| Colour rendering index | Ra 80 |
| SDCM | < 5 |
| Beam angle | 120° |
| Lumen maintenance | L80B20 @ 50,000 h |
| Energy efficiency class | G |
| Ingress protection | IP68 |
| Outline dimensions | W10 × H10 ± 0.5 mm |
| Surface material | Silicone |
| Cut length | 17.9 mm |
| Mounting | Fixed Clamp |
| Dimming method | Turn on the power and it lights up |
| Switching cycles | 15,000 times |
| Operating temperature | -25 °C to +45 °C |
| Relative humidity | 10–90% |
| Storage temperature | -40 °C to +60 °C |
| MTBF | 50,000 h |
| Packing | Box + carton |
| Packing quantity | 5 m/roll × 10 rolls = 50 m per carton |
Tools needed: scissors or side cutters, clean dry cloth, fixed clamp accessories.
Steps:
Terminal wire note: this model is supplied with PVC terminal connection wire as an accessory option rather than nylon — confirm connection hardware compatibility if standardising across multiple G series models in one project.
| Option | Details |
|---|---|
| Colour temperature | Tri-CCT 3000 / 4000 / 6500 K, specified at order |
| CRI | Customisable on request |
| Luminous flux | Customisable on request |
| Length | 5 m per roll standard; cuttable every 17.9 mm |
| Packaging | Box + carton standard; neutral or branded packaging available |
| OEM / ODM | Private label and custom packaging supported |
| MOQ | 50 sets |
| Accessory | Description |
|---|---|
| Fixed Clamp | Supplied 5 pcs per roll for mounting |
| Metal terminal connection wire | For durable, low-resistance feed connections |
| PVC terminal connection wire | Alternative flexible connection option |
| End plug | Seals the open end of a cut strip section |
Q: Is this a front-emitting or side-emitting strip?
A: Front-emitting. Light is viewed straight-on through the strip's top face. Side-emitting models elsewhere in the G series are specified for channel letter and signage applications where the light must exit through the side profile.
Q: What is Ruyi cut?
A: It refers to the every-LED cut design, allowing the strip to be trimmed at 17.9mm intervals — finer than a standard 25-33mm interval — for closer length matching.
Q: Can this strip bend around a tight corner?
A: The 360° free bending construction handles curves more readily than a standard strip, but always test a short offcut at the tightest planned radius before final installation, particularly in cold conditions where silicone stiffens.
Q: How does this compare with the 24V version at the same LED count?
A: Same 168 LED count, but this 12V version draws 0.83A against roughly half that at 24V, and produces slightly lower output. Choose 12V for retrofit onto an existing 12V system; choose 24V for new installations or longer runs.
Q: Can I change the colour temperature after ordering?
A: No, the Tri-CCT option (3000K, 4000K, or 6500K) is fixed at the time of manufacture based on what is specified at order.
Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 5m reels, 10 reels per carton totalling 50m, shipped from Guangzhou or Shenzhen.
This strip combines two flexibility features the G series generally offers separately: 360° free bending for curved routing, and Ruyi cut, the every-LED cut design that allows trimming at 6mm intervals rather than a wider fixed cut point. Together they make this one of the most installation-flexible strips in the 10x10mm Tri-CCT range — suited to curved runs that also need to terminate at a precise, non-standard length.
EN
