This model combines all three flexibility features available in the 12x12mm Tri-CCT range on a single strip: 360° free bending for curved routing, Ruyi cut at 6mm intervals for precise length matching, and Tri-CCT 3-in-1 colour temperature selection. It is the most installation-flexible option in the 12x12mm profile, at the cost of a lower output than the standard-cut equivalent.
At 168 2835 LEDs per metre and 24V DC, output is 400 lm/m from 8W, drawing 0.33A per metre — the lowest current draw among the 12x12mm Tri-CCT models, reflecting the lower per-metre power rating on this specific configuration. The trade is deliberate: fine cut precision and curved-bend capability together typically mean a lighter power circuit than a straight-run, standard-cut high-output board.
Construction is the standard G series gas-phase silicone jacket, front-emitting, IP68 rated, with a -25°C to +45°C operating range. Colour temperature is specified at order from 3000K, 4000K, or 6500K.
| Parameter | Details |
|---|---|
| Model No. | JNL-G-024V-2835-0168-05-S1XX-005-YYYY-08-68 |
| Item No. | 103400006 |
| Rated power | 8.0 W/m ± 10% |
| Rated voltage | 24 V DC |
| Input current | 0.33 A |
| LED type | 2835 |
| LED quantity | 168 PCS/m |
| Luminous flux | 400 lm/m |
| Colour temperature | Tri-CCT 3000 / 4000 / 6500 K (3-in-1, specified at order) |
| Colour rendering index | Ra 80 |
| SDCM | ≤ 5 |
| Beam angle | 120° |
| Lumen maintenance | L80B20 @ 50,000 h |
| Energy efficiency class | G |
| Ingress protection | IP68 |
| Outline dimensions | W12 × H12 ± 0.5 mm |
| Surface material | Silicone |
| Cut length | 6 mm (cuttable at every LED / Ruyi cut) |
| Mounting | Fixed Clamp |
| Dimming method | Turn on the power and it lights up |
| Switching cycles | 15,000 times |
| Operating temperature | -25 °C to +45 °C |
| Relative humidity | 10–90% |
| Storage temperature | -40 °C to +60 °C |
| MTBF | 50,000 h |
| Packing | Box + carton |
| Packing quantity | 5 m/roll × 10 rolls = 50 m per carton |
Tools needed: scissors or side cutters, clean dry cloth, measuring tape, fixed clamp accessories.
Steps:
Choosing this model over the standard-cut bend version: if the installation needs both curved routing and a precisely matched termination length, this model covers both requirements. Where only curved routing matters and output is the priority, the 500 lm/m standard-cut bend model in the same profile delivers more light.
| Option | Details |
|---|---|
| Colour temperature | Tri-CCT 3000 / 4000 / 6500 K, specified at order |
| CRI | Customisable on request |
| Luminous flux | Customisable on request |
| Length | 5 m per roll standard; cuttable every 6 mm |
| Packaging | Box + carton standard; neutral or branded packaging available |
| OEM / ODM | Private label and custom packaging supported |
| MOQ | 50 sets |
| Accessory | Description |
|---|---|
| Fixed Clamp | Supplied 5 pcs per roll for mounting |
| Metal terminal connection wire | For durable, low-resistance feed connections |
| PVC terminal connection wire | Alternative flexible connection option |
| End plug | Seals the open end of a cut strip section |
Q: Why is the output lower than the standard-cut bend version in the same profile?
A: This model prioritises combined curved-bend and fine-cut circuit design over raw output. At 400 lm/m it is dimmer than the 500 lm/m standard-cut bend model, but offers precision length matching the other model does not.
Q: What does "cuttable at every LED" combined with "360° bend" achieve together?
A: It allows a single strip to follow a curved path and still terminate at a precisely measured, non-standard length — useful for custom signage lettering or bespoke curved cabinetry where both properties are needed simultaneously.
Q: Is this a front-emitting or side-emitting strip?
A: Front-emitting. For side-viewed applications such as channel letters, the side-emitting models elsewhere in the G series are the correct choice.
Q: Can the colour temperature be changed after purchase?
A: No, it is fixed at manufacture from the Tri-CCT 3-in-1 range specified at order.
Q: What accessories come with this strip?
A: Fixed Clamp mounting clips, plus metal or PVC terminal connection wire options and an end plug for sealing cut ends.
Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 5m reels, 10 reels per carton totalling 50m, shipped from Guangzhou or Shenzhen.
This model combines all three flexibility features available in the 12x12mm Tri-CCT range on a single strip: 360° free bending for curved routing, Ruyi cut at 6mm intervals for precise length matching, and Tri-CCT 3-in-1 colour temperature selection. It is the most installation-flexible option in the 12x12mm profile, at the cost of a lower output than the standard-cut equivalent.
EN
