This model exists for one reason: clip compatibility. It is electrically and optically identical to the 9.5 × 5 mm version in the same range — same 120 LEDs, same 400 lumens per metre, same 5 W, same IP65 PVC body — and the only difference is 0.5 mm of body height, 5.5 mm against 5 mm. That is not a specification worth choosing between on performance grounds, because there is no performance difference to choose between. It matters only when the mounting hardware has already been specified.
In practice that happens more often than it sounds. Facade contractors standardise on a clip or a channel profile across a project, and a strip that sits half a millimetre low in the clip will work loose under thermal cycling — the strip expands and contracts daily across a -25°C to +45°C operating range, and a loose fit becomes a rattling fit and then a water-ingress path. If your clips are specified for the 5.5 mm body, this is the part to order. If they are specified for 5 mm, use the other one. If neither is specified yet, either will do, and the choice can be made on availability.
The performance envelope is worth stating plainly so the model is specified for the right job. At 400 lm/m this is the lowest output in the W range and is intended to draw a line rather than light a surface — for outline work that needs to do both, the 780 lm/m and 900 lm/m models are the correct starting point. Cutting is at one-metre intervals, so lengths are set in whole metres. Mounting is by clip and screw. Because it runs at mains voltage, current is 0.025 A per metre — roughly one seventeenth of what the same 5 W would draw at 12 V — which is why this type is used on long perimeters. We do not publish a maximum single-feed run length; the datasheet does not state one, so confirm your feed layout before ordering. Rated IP65 for sheltered outdoor use, supplied as a 50 m reel, with CE, CB, and RoHS certification held by the manufacturer.
Request quotation, datasheet, or free sample length: tel: +86 18933392222 | email: [email protected] | global.joineonlux.com — OEM, bulk order, and distributor pricing available.
This model exists for one reason: clip compatibility. It is electrically and optically identical to the 9.5 × 5 mm version in the same range — same 120 LEDs, same 400 lumens per metre, same 5 W, same IP65 PVC body — and the only difference is 0.5 mm of body height, 5.5 mm against 5 mm. That is not a specification worth choosing between on performance grounds, because there is no performance difference to choose between. It matters only when the mounting hardware has already been specified.
EN
