Key Features

• Full RGB colour change – 5050 RGB packages deliver the complete colour range for decorative, seasonal, and event lighting.
• 300 pcs 5050 LEDs on 5 metres – The 5050 format is physically larger than the 2835 used in white models, providing the three-die structure required for colour mixing.
• RF remote at 10–20 metres – No line of sight required; unaffected by dust, grease, or obstructions between remote and controller. Button control on the unit remains available.
• Completely off-grid – Solar charging into an 18650 / 1800 mAh cell with automatic dusk activation; no mains connection, no wiring, no running cost.
• Detachable adjustable ground spike – Angle the solar panel toward peak sun, then detach it for cleaning or seasonal storage.
• IP65 sealed construction – W13.0 × H7.0 ± 0.5 mm brushed PVC extrusion rated for outdoor use from -25 °C to +45 °C.
• Wide 120° beam angle – Even colour wash along the run without visible hot spots between LEDs.
• Field-cuttable at 50 mm – Adapt the run length on site; the connected section retains IP65 sealing.

Specifications

Materials & Finish

• Strip housing: PVC extrusion with brushed external finish, W13.0 × H7.0 ± 0.5 mm — 0.5 mm wider than the white-light models to accommodate the larger 5050 RGB package.
• LED format: 5050 RGB, the three-die package standard for colour-changing applications.
• Ingress protection: IP65 across the strip body and the docking joint between strip and solar control unit.
• Battery cell: 18650 lithium cell, 1800 mAh at 3.2 V, sealed within the solar control unit.
• Thermal range: -25 °C to +45 °C operating, -20 °C to +45 °C storage, 10–90% relative humidity.
• Photometric stability: L70B20 lumen maintenance at 20,000 hours.
• Mechanical endurance: 15,000 switching cycles; MTBF 20,000 hours.

Assembly & Installation

Tools needed: screwdriver, and a drill if fixing clips to masonry.

Steps:

1. Select the solar panel position first — unobstructed daylight for as much of the day as possible.
2. Push the ground spike into soil, or hang the panel on a wall, fence, or railing.
3. Angle the panel toward peak sun.
4. Route the strip along the intended line and fix it with the supplied clips, screws, and expansion bolts.
5. Connect the strip to the solar control unit through the keyed docking connector.
6. Pair the RF remote and cycle the colour modes to confirm operation across the full run.

Positioning note for colour installations: RGB strips read best when the light washes a surface — a wall, fence, planter face, or decking edge — rather than pointing into open air. Mounting the strip so the 120° beam grazes a surface produces a markedly stronger visual effect than a free-hanging run.

Applications

• Party and event decoration – Colour-matched lighting for garden gatherings, birthdays, and seasonal celebrations.
• Patios and decking – Decorative colour wash along step edges, deck perimeters, and balustrades.
• Balconies and roof terraces – Full colour ambience in rental properties with no permanent wiring permitted.
• Hospitality outdoor areas – Garden bars, pop-up venues, and restaurant terraces changing colour scheme by event or season.
• Camping and mobile setups – The detachable ground spike suits campsite pitches, caravans, and glamping installations.
• Festive and seasonal displays – Retail frontages and residential exteriors requiring temporary colour lighting without an electrical installation.

Customization

Certifications

• CE
• CB
• RoHS
• Test reports available on request

Packing & Logistics

• Packing type: colour box + carton
• Packing quantity: 20 SET per carton
• Inner box dimensions: L215 × W185 × H100 mm
• Carton dimensions: L525 × W450 × H390 mm
• Accessories included: fixed clip, screw, expansion bolt
• MOQ: 50 sets
• Lead time: 15–21 days
• Port of loading: Guangzhou / Shenzhen

Service

• Warranty: 2 years
• Samples: free samples on standard items; freight collect
• Response time: within 2 hours
• After-sales: technical support by email or phone throughout the warranty period. Report quality issues with photographs, video, and the item number; verified defects are resolved by replacement parts or replacement units shipped with your next order, or by credit where no follow-up order is scheduled. Faults caused by physical damage, unauthorised modification, or use outside the rated environmental conditions fall outside warranty cover.
• Contact: tel: +86 18933392222 | email: [email protected] | global.joineonlux.com

FAQ

Q: What is the difference between this RGB kit and the white solar LED strip light kits?
A: This model uses 5050 RGB packages for full colour change, while the single colour and dual white models use 2835 packages for fixed or switchable white light. The RGB strip is also 0.5 mm wider at W13.0 mm to house the larger LED format.

Q: How does the remote control work?
A: By RF radio signal at 10–20 metres. It does not require line of sight, so the control unit can sit behind planting or at ground level without affecting operation. Button control on the unit is available as an alternative.

Q: Does the RGB strip produce white light?
A: This model is an RGB colour-changing product. If a dedicated warm white channel is required alongside colour change, specify the RGBW models in the T series, which add 2835 white LEDs at 3000 K.

Q: Is any wiring or electrical work needed?
A: None. The solar panel charges the integrated 18650 / 1800 mAh battery during the day and the strip illuminates automatically at dusk — no mains supply, no trenching, no electrician.

Q: Can the strip be cut to a shorter length?
A: Yes, at the marked 50 mm intervals. The connected section keeps its IP65 rating; the removed section is no longer powered.

Q: What are the MOQ, lead time, and shipping port?
A: MOQ is 50 sets with a 15–21 day lead time. Cartons hold 20 sets and ship from Guangzhou or Shenzhen.