Key Features

• 512 LEDs per metre at 24V – The highest density available in the 8mm family, matched only by the 12V version of the same specification.
• 1400 lm/m at half the current of 12V – Identical output to the 12V 512-LED board, achieved at 0.52A per metre instead of 1.0A, materially reducing voltage drop on long runs.
• Energy efficiency class E – Meets specification thresholds that class F product does not clear.
• 62.5mm cut interval – Suited to longer continuous sections rather than short precision-matched compartments.
• Near-continuous emitting surface – At 512 LEDs per metre, individual emitter gaps are effectively invisible, producing a smooth luminous line.
• 8mm slim profile – Standard channel compatibility at the series' highest density.
• Six colour temperatures, SDCM ≤5 – 2700K to 6500K specified at order.
• L80B20 at 20,000 hours – 80% lumen retention with matching MTBF, 15,000 rated switching cycles.

Specifications

Materials & Finish

• Construction: flexible COB board with 512 large-die emitters per metre, the highest density in the 8mm family, beneath a continuous phosphor layer.
• Profile: W8 × H1.65 ± 0.5 mm, matching standard 8mm channel internals.
• Surface treatment: phosphor coating producing a near-continuous emitting line.
• Colour consistency: SDCM ≤5 across six colour temperature options.
• Thermal range: -25 °C to +45 °C operating; -40 °C to +60 °C storage.
• Photometric stability: L80B20 at 20,000 hours.
• Mechanical: flexible, bend and twist tolerant; 15,000 switching cycles.

Assembly & Installation

Tools needed: scissors or side cutters, clean dry cloth.

Steps:

1. Total the run length and multiply by 12.5W to size the 24V driver, adding 20% headroom.
2. Clean and dry the mounting surface.
3. Cut only at the marked 62.5mm intervals.
4. Peel the backing film and press the strip firmly along its length.
5. Connect using the 2P-8 accessory range.
6. Apply power; the strip illuminates immediately.

Why this model over the 12V version on long runs: identical LED count and output, but this 24V board draws roughly half the current. On any run beyond a short cabinet section, that translates directly into more consistent brightness end to end and the option of a longer single feed before a second injection point is needed.

Applications

• Long cove and ceiling perimeter lighting – 24V architecture and reduced current draw suit extended continuous runs.
• Premium display cabinet lighting – Near-continuous light line for high-end retail and jewellery presentation.
• Commercial and contract cabinetry – Class E efficiency clears specification thresholds on tendered projects.
• Wine cabinets and bar shelving – Smooth, dense light for bottle and glassware display.
• TV backlighting and feature walls – Even dot-free line for close-viewed installations.
• Wardrobe and dressing room lighting – High-output illumination for garment assessment.
• Automotive and vehicle showroom lighting – 24V compatibility with commercial vehicle electrical systems.

Customization

Certifications

• CE
• CB
• RoHS
• Test reports available on request

Packing & Logistics

• Packing type: reel + ESD bag + carton
• Packing quantity: 5 m per roll, 100 rolls per carton, 500 m total
• MOQ: 50 sets
• Lead time: 15–21 days
• Port of loading: Guangzhou / Shenzhen

Service

• Warranty: 2 years
• Samples: free samples on standard items; freight collect
• Response time: within 2 hours
• After-sales: technical support by email or phone throughout the warranty period. Report quality issues with photographs, video, and the item number; verified defects are resolved by replacement parts or replacement units shipped with your next order, or by credit where no follow-up order is scheduled. Faults caused by physical damage, unauthorised modification, or use outside the rated environmental conditions fall outside warranty cover.
• Contact: tel: +86 18933392222 | email: [email protected]

FAQ

Q: Why does this 24V version have a wider cut interval than the 12V version of the same density?
A: The 62.5mm interval here reflects a different circuit segmentation than the 31.3mm interval on the 12V board of the same LED count. Neither is adjustable — check the cut chart against your exact installation length before ordering, since the two voltage versions are not interchangeable at the same cut point.

Q: What is the real-world benefit of 24V over 12V at this density?
A: Identical output at half the current draw — 0.52A against 1.0A per metre. On runs beyond roughly 5 metres, this means less voltage drop and more consistent brightness from end to end, without needing to inject power at multiple points as often as the 12V version requires.

Q: Is this the brightest strip in the 8mm range?
A: It shares the top output figure of 1400 lm/m with the 12V 512-LED board and the 24V 480-LED board. For the single highest output in the 8mm family, the 640-LED 24V board reaches 1800 lm/m, though at a lower LED density.

Q: Can this be dimmed?
A: The strip has no onboard dimming circuit and illuminates at full output once powered. Dimming requires an external dimmable 24V driver and compatible control.

Q: Is this suitable for a covered outdoor area?
A: No. IP20 provides no moisture protection. This is strictly an indoor, dry-location product.

Q: What are the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 5m reels, 100 reels per carton totalling 500m, shipped from Guangzhou or Shenzhen.