Key Features

• CRI 90 on both channels in a compact profile – Colour-accurate warm and daylight white at 8mm width, narrower than the full spectrum 10mm alternative.
• Two-wire connection architecture – Simpler accessory system shared conceptually with the single-colour 8mm strips, easing stock management for distributors.
• 560 LEDs per metre – 280 per channel, maintaining consistent density across both colour settings.
• 24V operation – Lower current draw than a 12V equivalent, supporting longer runs.
• One strip, two colour temperatures – Removes the need for separate warm and cool fixtures.
• 8mm profile, H2.5mm height – More compact than the full spectrum dual white model while retaining CRI 90 on both channels.
• 50mm cut interval – Practical adjustment granularity for standard cabinet sections.
• L80B20 at 20,000 hours – 80% lumen retention with matching MTBF, 15,000 rated switching cycles.

Specifications

Materials & Finish

• Construction: COB flexible strip with two independently controlled colour channels — 280 LEDs at 2700K and 280 at 6500K per metre.
• Profile: W8 × H2.5 ± 0.5 mm, more compact than the full spectrum 10mm dual white model.
• Surface treatment: dammed stretch coating with phosphor-based colour temperature tuning on both channels.
• Colour performance: Ra 90 on both channels, SDCM ≤5.
• Thermal range: -25 °C to +45 °C operating; -40 °C to +60 °C storage.
• Photometric stability: L80B20 at 20,000 hours.
• Mechanical: flexible, bend and twist tolerant; 15,000 switching cycles.

Assembly & Installation

Tools needed: scissors or side cutters, clean dry cloth.

Steps:

1. Confirm the 24V supply capacity against 10W per metre for the total run.
2. Clean and dry the mounting surface.
3. Cut only at the marked 50mm intervals.
4. Peel the backing film and press the strip along its length.
5. Connect using the appropriate 2P-8 accessory: board connector, lead wire, in-line joiner, or L/T/cross transition.
6. Apply power and verify both channels operate correctly across the full run.

Choosing between this and the full spectrum model: if the installation needs the highest possible output on both channels, specify the 10mm full spectrum dual white model (800-1100 lm/m). If a more compact 8mm profile and standard accessory compatibility are the priority, and 600-700 lm/m is sufficient, this model is the more economical and space-efficient choice.

Applications

• Standard kitchen under-cabinet lighting – Switchable warm and daylight white at accurate colour rendering in a compact profile.
• Wardrobe and closet interiors – Daylight for garment assessment, warm white for general use.
• Display and retail cabinets – Accurate colour rendering on both settings within standard 8mm channel hardware.
• Bathroom and vanity lighting – Colour-accurate task and ambient lighting in a single fixture.
• Bed head and under-bed lighting – Compact dual white option for bedroom installations.
• TV backlighting and feature panels – Switchable ambience in a slim profile.

Customization

Certifications

• CE
• CB
• RoHS
• Test reports available on request

Packing & Logistics

• Packing type: reel + ESD bag + carton
• Packing quantity: 10 m per roll, 50 rolls per carton, 500 m total
• MOQ: 50 sets
• Lead time: 15–21 days
• Port of loading: Guangzhou / Shenzhen

Service

• Warranty: 2 years
• Samples: free samples on standard items; freight collect
• Response time: within 2 hours
• After-sales: technical support by email or phone throughout the warranty period. Report quality issues with photographs, video, and the item number; verified defects are resolved by replacement parts or replacement units shipped with your next order, or by credit where no follow-up order is scheduled. Faults caused by physical damage, unauthorised modification, or use outside the rated environmental conditions fall outside warranty cover.
• Contact: tel: +86 18933392222 | email: [email protected]

FAQ

Q: How is this different from the full spectrum dual white model?
A: Both carry 560 LEDs per metre at CRI 90 on both channels. This model outputs 600-700 lm/m at 8mm width with a two-wire connection system; the full spectrum model outputs 800-1100 lm/m at 10mm width with a three-wire system. Choose this model for a more compact profile and standard accessory compatibility; choose the full spectrum model for maximum output.

Q: Is CRI 90 genuinely achieved on both the warm and cool channels?
A: Yes, both the 2700K and 6500K channels are rated Ra 90. This is not limited to one channel, unlike some lower-specification dual white product.

Q: What accessories does this strip use?
A: The standard 2P-8 accessory range — the same connector family used by the single-colour 8mm strips in the D series — simplifying stock management for distributors already carrying that range.

Q: Can this strip be used in a bathroom?
A: The IP20 rating means it is for indoor, dry locations only. Do not install in areas subject to splashing, steam, or condensation.

Q: Why is the output lower than the full spectrum model at the same LED count?
A: The two-wire construction and different LED bead specification (5×18mil versus 6×20mil) produce a lower output per channel, trading maximum brightness for a more compact profile and simpler connection system.

Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 10m reels, 50 reels per carton totalling 500m, shipped from Guangzhou or Shenzhen.