Getting high output without a poor energy rating usually means moving to a wider board or a higher voltage. This model does it on a standard 8mm board at 12V: 2900 lumens per metre from 18W, which is roughly 161 lumens per watt and earns energy efficiency class C — one of only two models in the L series to reach that rating, and achieved here at nearly triple the output of the 1000 lm/m class. For display case and cove work, where the light has to be bright enough to read merchandise through glass but the fittings run all day, that combination is the whole argument.
The other point worth noting is what is packed into the width. 192 LEDs per metre on an 8mm board is a density most manufacturers only offer at 10mm or wider, and it means this model fits standard 8mm channels and extrusions while delivering output that would otherwise require a wider profile. The cut interval follows from that density at 10.4mm — the finest pitch in the L series apart from the 4.8mm of the 1248-LED model, allowing close length matching in display case interiors where runs are cut to fit fixed case dimensions.
Running on DC 12V at 0.75A per metre. Note that at 18W per metre a 5m reel represents roughly 90W, so supply capacity should be confirmed against run length, and feed points planned roughly every 5m as with all 12V models. Installation is tool-free via double-sided adhesive tape film. Six colour temperatures from 2700K through 6500K are specified at order stage. Rated IP20 for indoor dry-location use, with CE, CB, and RoHS certification held by the manufacturer.
Request quotation, datasheet, or free sample length: tel: +86 18933392222 | email: [email protected] — OEM, bulk order, and distributor pricing available.
Getting high output without a poor energy rating usually means moving to a wider board or a higher voltage. This model does it on a standard 8mm board at 12V: 2900 lumens per metre from 18W, which is roughly 161 lumens per watt and earns energy efficiency class C — one of only two models in the L series to reach that rating, and achieved here at nearly triple the output of the 1000 lm/m class. For display case and cove work, where the light has to be bright enough to read merchandise through glass but the fittings run all day, that combination is the whole argument.
EN
