Key Features

• Complete capability in one SKU – Full-length addressable dream color effects plus 380 lm of dedicated 3000 K warm white, neither function reduced to fit the other.
• 1200 LEDs across two technologies – 5050 RGB under IC addressable control combined with 2835 warm white packages over 10 metres.
• Highest white output in the range – 380 lm at 5 W and 150 lm at 2 W, both at 3000 K, with CRI 70 and SDCM ≤ 7.
• End-to-end effect synchronisation – One control unit drives the entire 10 metres, so dynamic sequences travel the full length without a break at a controller join.
• 26700 / 4000 mAh high-capacity battery – Supports the 5 W rated load of a 1200-LED dual-technology strip across a full night.
• RF remote at 10–20 metres – Reach the whole run from any position; no line of sight required, unaffected by dust or obstructions.
• No installation infrastructure – No trenching, no cabling, no electrician, no metered running cost.
• IP65 brushed PVC extrusion – W13.0 × H7.0 ± 0.5 mm, rated -25 °C to +45 °C, 15,000 switching cycles, MTBF 20,000 hours.

Specifications

Materials & Finish

• Strip housing: brushed-finish PVC extrusion, W13.0 × H7.0 ± 0.5 mm, carrying both LED technologies across the full 10 metre length.
• LED configuration: 5050 RGB under IC addressable control plus 2835 warm white at 3000 K on an independent channel, 1200 pcs total.
• Ingress protection: IP65 across the strip and the docking joint.
• Battery cell: 26700 lithium cell, 4000 mAh at 3.2 V, matched to the 5 W rated load.
• Thermal range: -25 °C to +45 °C operating, -20 °C to +45 °C storage, 10–90% relative humidity.
• Photometric quality: CRI 70, SDCM ≤ 7 on the white channel; L70B20 lumen maintenance at 20,000 hours.
• Mechanical endurance: 15,000 switching cycles; MTBF 20,000 hours.

Assembly & Installation

Tools needed: screwdriver, and a drill if fixing clips to masonry or hard fencing.

Steps:

1. Plan the complete route first — confirm it stays within 10 metres and follows one continuous direction.
2. Position the solar panel at the point of longest daylight exposure. With a 5 W load driving 1200 LEDs, panel siting determines whether the system runs a full night.
3. Insert the ground spike into soil, or hang the panel on a wall, fence, or railing.
4. Angle the panel toward peak sun.
5. Fix the strip at even 500–600 mm intervals with the supplied clips, screws, and expansion bolts.
6. Connect the strip to the solar control unit via the keyed docking connector.
7. Pair the RF remote, then test both a full-length chase effect and the 3000 K white channel from the far end of the run.

Commissioning guidance: on this model, panel placement and route direction both matter. Site the panel for maximum charge to support the 5 W load, and keep the strip on a single readable path so addressable sequences travel coherently across all 10 metres.

Applications

• Hospitality terraces and garden bars – Warm white for service periods, full-length dynamic colour for themed events.
• Complete garden perimeters – Boundary lighting that functions as both practical illumination and a designed visual feature.
• Event lawns, marquees, and function spaces – Working light during setup, synchronised colour sequences during the event.
• Retail and commercial frontages – Extended animated runs along shopfronts, entrances, and signage lines.
• Large terraces, decking, and pergolas – Continuous linear lighting along structural edges with switchable character.
• Premium residential outdoor spaces – Driveways, pathways, and entertaining areas requiring both usable light and visual impact.

Customization

Certifications

• CE
• CB
• RoHS
• Test reports available on request

Packing & Logistics

• Packing type: colour box + carton
• Packing quantity: 20 SET per carton
• Inner box dimensions: L235 × W205 × H105 mm
• Inner box weight: 1550 g
• Carton dimensions: L550 × W490 × H430 mm
• Accessories included: fixed clip, screw, expansion bolt
• MOQ: 50 sets
• Lead time: 15–21 days
• Port of loading: Guangzhou / Shenzhen

Service

• Warranty: 2 years
• Samples: free samples on standard items; freight collect
• Response time: within 2 hours
• After-sales: technical support by email or phone throughout the warranty period. Report quality issues with photographs, video, and the item number; verified defects are resolved by replacement parts or replacement units shipped with your next order, or by credit where no follow-up order is scheduled. Faults caused by physical damage, unauthorised modification, or use outside the rated environmental conditions fall outside warranty cover.
• Contact: tel: +86 18933392222 | email: [email protected] | global.joineonlux.com

FAQ

Q: What makes this the flagship model of the T series?
A: It is the only configuration combining full 10 metre addressable dream color effects with a high-output 3000 K warm white channel. At 1200 LEDs and 380 lm of white output, it delivers both maximum visual impact and the brightest usable white light in the range from a single installation.

Q: How does the white output compare across the series?
A: This model delivers 380 lm at 5 W on the white channel. The 10 metre RGBW kit reaches 420 lm, the 5 metre addressable plus warm white model 210 lm, and the 5 metre RGBW kit 160 lm. Choose this model where addressable dynamic effects are required alongside strong white output.

Q: Can two 5 metre addressable kits achieve the same result?
A: Not for continuous effects. Each kit has an independent controller, so sequences cannot travel across the join in step. This model drives all 1200 LEDs from one control unit, keeping effects synchronised across the full 10 metres.

Q: Is the warm white mixed from the RGB channels?
A: No. It is produced by dedicated 2835 white LEDs at 3000 K with CRI 70 and SDCM ≤ 7, which is why it works as a primary light source rather than a colour approximation.

Q: How long will it run on a single charge?
A: Runtime depends on the mode selected and available daylight for charging. The low brightness setting at 150 lm / 2 W conserves stored energy and extends operating hours during shorter winter days.

Q: What are the MOQ, lead time, and shipping port?
A: MOQ is 50 sets, lead time 15–21 days, shipped from Guangzhou or Shenzhen. Each carton holds 20 sets.