Key Features

• Brightest white output in the series – 420 lm at 5 W on the 3000 K channel, sufficient for functional rather than purely decorative lighting.
• 1200 LEDs across two technologies – 5050 RGB for colour change and 2835 for dedicated warm white, over a full 10 metre run.
• Two brightness levels on white – 420 lm at 5 W for full illumination, 170 lm at 2 W to extend runtime on shorter charging days.
• Genuine warm white channel – CRI 70, SDCM ≤ 7 at 3000 K from dedicated white emitters, not blended from RGB.
• 26700 / 4000 mAh high-capacity battery – Matched to the 5 W load of a 1200-LED dual-technology strip.
• RF remote at 10–20 metres – Radio control across the full run without line of sight; button control retained on the unit.
• Single-controller synchronisation – Colour and white transitions stay in step along the entire 10 metres, which paired 5 metre kits cannot guarantee.
• IP65 brushed PVC construction – Rated -25 °C to +45 °C, with 15,000 switching cycles and MTBF 20,000 hours.

Specifications

Materials & Finish

• Strip housing: brushed-finish PVC extrusion, W13.0 × H7.0 ± 0.5 mm, carrying both LED technologies on a single board across 10 metres.
• LED configuration: 5050 RGB plus 2835 warm white at 3000 K on independent channels, 1200 pcs total.
• Ingress protection: IP65 across the strip and the strip-to-controller docking joint.
• Battery cell: 26700 lithium cell, 4000 mAh at 3.2 V, sized for the 5 W rated load.
• Thermal range: -25 °C to +45 °C operating, -20 °C to +45 °C storage, 10–90% relative humidity.
• Photometric quality: CRI 70, SDCM ≤ 7 on the white channel; L70B20 lumen maintenance at 20,000 hours.
• Mechanical endurance: 15,000 switching cycles; MTBF 20,000 hours.

Assembly & Installation

Tools needed: screwdriver, and a drill if fixing clips to masonry or hard fencing.

Steps:

1. Confirm the full route stays within 10 metres before fixing any hardware.
2. Position the solar panel at the point of longest daylight exposure — with a 5 W load, charging position directly determines nightly runtime.
3. Insert the ground spike into soil, or hang the panel on a wall, fence, or railing.
4. Angle the panel toward peak sun.
5. Fix the strip every 500–600 mm using the supplied clips, screws, and expansion bolts.
6. Connect the strip to the solar control unit through the keyed docking connector.
7. Pair the RF remote and test both the colour modes and the 3000 K white channel across the full length.

Specification note: where the white channel will be used as the primary light source most nights, prioritise panel placement over strip aesthetics during planning. A well-sited panel on a 5 W system is the difference between full-night operation and early cut-off.

Applications

• Terraces and outdoor dining – 420 lm warm white as the primary evening light source, colour modes for entertaining.
• Full garden perimeters – Complete boundary coverage with both functional and decorative capability from one unit.
• Hospitality outdoor areas – Restaurant terraces and garden bars running white for service and colour for themed nights.
• Pathways and driveways – Practical illumination along longer routes without trenching or cabling.
• Event and function spaces – Marquee perimeters, event lawns, and outdoor venues requiring both working light and colour.
• Pergolas and covered structures – Continuous linear lighting along structural lines with switchable character.

Customization

Certifications

• CE
• CB
• RoHS
• Test reports available on request

Packing & Logistics

• Packing type: colour box + carton
• Packing quantity: 20 SET per carton
• Inner box dimensions: L235 × W205 × H105 mm
• Inner box weight: 1470 g
• Carton dimensions: L550 × W490 × H430 mm
• Accessories included: fixed clip, screw, expansion bolt
• MOQ: 50 sets
• Lead time: 15–21 days
• Port of loading: Guangzhou / Shenzhen

Service

• Warranty: 2 years
• Samples: free samples on standard items; freight collect
• Response time: within 2 hours
• After-sales: technical support by email or phone throughout the warranty period. Report quality issues with photographs, video, and the item number; verified defects are resolved by replacement parts or replacement units shipped with your next order, or by credit where no follow-up order is scheduled. Faults caused by physical damage, unauthorised modification, or use outside the rated environmental conditions fall outside warranty cover.
• Contact: tel: +86 18933392222 | email: [email protected] | global.joineonlux.com

FAQ

Q: How bright is the warm white channel on this 10 metre RGBW kit?
A: 420 lm at 5 W on high mode and 170 lm at 2 W on low mode, both at 3000 K. This is the highest white output in the T series and is suitable for use as a primary outdoor light source rather than accent lighting only.

Q: What is the difference between this and the 5 metre RGBW kit?
A: This model runs 1200 LEDs over 10 metres at 5 W with a 26700 / 4000 mAh battery and 420 lm white output. The 5 metre version runs 600 LEDs at 2 W with an 18650 / 1800 mAh cell and 160 lm. Both combine 5050 RGB colour with 2835 warm white at 3000 K.

Q: Does using the colour modes drain the battery faster than white?
A: Runtime depends on the mode and brightness level selected. The low brightness setting at 170 lm / 2 W conserves stored charge and is the practical choice during shorter winter charging days.

Q: Can the strip be cut to fit a shorter run?
A: Yes, at the marked 50 mm intervals. The connected portion retains its IP65 rating; the removed section is no longer powered.

Q: Is any electrical installation work required?
A: No. The kit is fully off-grid — solar charging into the integrated battery, automatic dusk activation, no mains connection, and no running cost.

Q: What are the MOQ, lead time, and shipping port?
A: MOQ is 50 sets, lead time 15–21 days, shipped from Guangzhou or Shenzhen. Each carton holds 20 sets.