Core Features

• 1950 lumens per metre — 44% more than the 12 V dual-white model — up from 1350 lm/m, which is the difference between an ambient fitting and one that will light a working surface.
• 0.67 A per metre — a third less current than the 12 V version — down from 1.0 A/m, so continuous runs stay even from a single feed where the 12 V model would need intermediate injection.
• 240 LEDs/M against 192 on the 12 V version — higher density keeps both channels free of visible points when run individually.
• Two white channels on one board — 3000 K warm and 6500 K cool, wired separately and switched independently or together, replacing two installed runs with one.
• 3P connection for shared return — the two channels share a common return, so the strip takes a 3-pin connector rather than the 2-pin used on single-colour models.
• Energy efficiency class E — held at 16 W/m despite the output increase.
• Self-adhesive backing — double-sided tape film bonds directly to aluminium channels, coves, and mounting surfaces without clips.
• CE / CB / RoHS certified — manufacturer-held certifications supporting European and international B2B procurement.

Application Scenarios

• Full kitchen runs on three walls — the core use case; low current means one feed covers a continuous run that would need several at 12 V.
• Hotel corridor and circulation coves — long dual-white runs where warm and cool are switched by time of day, without intermediate feed points.
• Open-plan living and dining areas — one run serves both the working and the relaxing mode of the same space.
• Retail shopfloor perimeter lighting — switch the store's character between daytime trading and evening ambience from one installation.
• Office breakout and meeting areas — cooler light for work sessions, warmer for informal use, selected at the switch.
• Residential bedroom and dressing room coves — 1950 lm/m is enough for indirect room lighting while keeping the two-temperature flexibility.

Technical Specifications

• Model No. — JNL-L-024V-2835-0240-12-D2XX
• Item No. — To be confirmed (please quote the model code above when enquiring)
• LED type — 2835 SMD
• LED quantity — 240 PCS/m (dual white)
• Rated voltage — 24 V DC
• Rated power — 16 W/m ± 10%
• Input current — 0.67 A @ 1m
• Luminous flux — 1950 lm/m (both channels combined)
• Colour temperature — 3000 K + 6500 K dual white; the two channels are fixed values and are selected between, not continuously variable
• Colour rendering index — Ra 80
• SDCM — ≤ 5
• Beam angle — 120°
• Lumen maintenance — L80B20 @ 20,000 h
• Energy efficiency class — E
• Ingress protection — IP20 (indoor dry location only)
• Outline dimensions — W12 × H1.2 ± 0.5 mm
• Surface material — Bare PCB (no silicone sleeve)
• Cut length — 50 mm
• Mounting method — Double-sided adhesive tape film
• Dimming method — Turn on the power and it lights up; warm and cool channels switch independently
• Switching cycles — 15,000 times
• Operating temperature — -25°C to +45°C
• Storage temperature — -40°C to +60°C
• Relative humidity — 10–90%
• MTBF — 20,000 h
• Connector compatibility — 3P cable, 3P board connector MA3P-10, 3P board connector with DuPont wire CA3P-10-DC, 3P single-end lead CA3P-10-1, 3P double-end lead CA3P-10-2, 3P straight board-to-board CB3P-10, 3P L-shape CB3P-10-L, 3P +-shape CB3P-10-+, 3P T-shape CB3P-10-T
• Accessories — Not specified on the datasheet
• Packing — Reel + ESD bag + Inner box + Carton
• Packing quantity — 5 m/roll × 100 rolls = 500 m per carton
• Certification — CE / CB / RoHS

Contact

Request quotation, datasheet, or free sample length: tel: +86 18933392222 | email: [email protected] — OEM, bulk order, and distributor pricing available.