Standard LED strips read as a row of dots the moment you look directly at them — fine for hidden cove applications, but a problem wherever the fixture itself is part of the visual design. This silicone LED neon strip light solves that with a continuous silicone jacket over the LED board: the light emits through a smooth, glass-like face with no visible LED points, at any viewing angle.
The silicone itself is gas-phase silicone, chosen for a soft, skin-like touch and genuine flexibility rather than a hard plastic sleeve. It tolerates a wide operating range, from -25°C to +45°C, and carries IP68 protection — rated for continuous submersion, not just splash resistance — so it holds up in outdoor cove, landscape, and facade installations that a standard IP20 strip cannot.
At 10x10mm, this is the compact end of the G series square profile range. It runs 120 COB-style 2835 LEDs per metre at 12V DC, delivering 600 lm/m, with dual white output available in 3000K, 4000K, and 6500K at the point of order. The strip cuts every 25mm, mounts with a simple fixed clamp system, and connects to power without any controller or programming — it illuminates the moment power is applied.
Tools needed: scissors or side cutters, clean dry cloth, fixed clamp accessories.
Steps:
Note on connection style: this strip supports left-side, right-side, or direct in-line connection depending on the installation layout — plan the feed point location before final clamp installation to avoid an awkward cable run.
| Option | Details |
|---|---|
| Colour temperature | 3000 / 4000 / 6500 K, specified at order |
| CRI | Customisable on request |
| Luminous flux | Customisable on request |
| Length | 5 m per roll standard; cuttable every 25 mm |
| Packaging | Scroll + carton standard; neutral or branded packaging available |
| OEM / ODM | Private label and custom packaging supported |
| MOQ | 50 sets |
| Accessory | Description |
|---|---|
| Fixed Clamp | Standard mounting clamp for channel or direct-surface installation |
| Metal terminal connection wire | For durable, low-resistance feed connections |
| Nylon terminal connection wire | Alternative lightweight connection option |
| End plug | Seals the open end of a cut strip section |
Q: What does "dual white" mean on this strip?
A: The strip is specified in one of three fixed colour temperatures — 3000K, 4000K, or 6500K — selected at the time of order. The colour temperature is fixed once manufactured and does not change afterward.
Q: Why choose a silicone neon strip over a standard exposed LED strip?
A: The continuous silicone jacket eliminates the visible LED dots that standard strips show, producing a smooth, even light line. It also adds IP68 water and dust protection that exposed-LED strips at this price point typically do not have.
Q: Can this strip be installed outdoors permanently?
A: Yes, IP68 rating supports outdoor and even submerged installation. Confirm the operating temperature range of -25°C to +45°C matches the installation climate before specifying for extreme environments.
Q: What is the difference between this model and the 12x12mm version in the range?
A: Same LED count and dual white configuration, but the 12x12mm version is a larger profile with slightly different power draw (11W vs 10W) and output (550 lm/m vs 600 lm/m). Choose based on the channel or mounting profile available at the installation site.
Q: Does this strip require a controller?
A: No, it connects directly to a 12V DC power supply and illuminates immediately. No remote, app, or dimming controller is included or required for basic operation.
Q: What is the MOQ and lead time?
A: MOQ is 50 sets, lead time 15–21 days. Supplied on 5m reels, 10 reels per carton totalling 50m, shipped from Guangzhou or Shenzhen.
Standard LED strips read as a row of dots the moment you look directly at them — fine for hidden cove applications, but a problem wherever the fixture itself is part of the visual design. This silicone LED neon strip light solves that with a continuous silicone jacket over the LED board: the light emits through a smooth, glass-like face with no visible LED points, at any viewing angle.
EN
